MakeIntellisence

ProEasyAPIClass

No-Supported

Obtains a Pro-Server handle for use of a Multi-Handle function.

Normal end: Other than 0(Handle code)Abnormal end: 0

Releases an obtained Pro-Server handle.

(In) Pro-Server handle to be released Normal end: 0 Abnormal end: Error code

Loads the network project file specified with the argument.

(In) Specify the full path of a network project file to be loaded. Normal end: 0 Abnormal end: Error code

Loads the network project file specified with the argument.

(In) Specify the full path of a network project file to be loaded. (In Reserve (Fixed to "1") Normal end: 0 Abnormal end: Error code

Loads the network project file specified with the argument.

(In) Pro-Server handle (In) Specify the full path of a network project file to be loaded. Normal end: 0 Abnormal end: Error code

Loads the network project file specified with the argument.

(In) Pro-Server handle (In) Specify the full path of a network project file to be loaded. (In Reserve (Fixed to "1") Normal end: 0 Abnormal end: Error code

Converts an error code returned by each API of 'Pro-Server EX' into an error message.

(In) Error code returned by 'Pro-Server EX' function (Out) String type variable that stores converted character string Return valueNormal end: Other than 0 Failure in character string conversion: 0

Converts an error code returned by each API of 'Pro-Server EX' into an error message. 'Pro-Server EX' then returns the error message together with the error occurrence condition and other information, ifpossible. EasyLoadErrorMessageEx() may return a different error message relative to the same error code, depending on the situation.

(In) Error code returned by 'Pro-Server EX' function (Out) String type variable that stores converted character string Return valueNormal end: Other than 0 Failure in character string conversion: 0

Converts an error code returned by each API of 'Pro-Server EX' into an error message. 'Pro-Server EX' then returns the error message together with the error occurrence condition and other information, ifpossible. EasyLoadErrorMessageEx() may return a different error message relative to the same error code, depending on the situation.

(In) Pro-Server handle (In) Error code returned by 'Pro-Server EX' function (Out) String type variable that stores converted character string Return valueNormal end: Other than 0 Failure in character string conversion: 0

Converts an error code returned by each API of 'Pro-Server EX' into an error message. 'Pro-Server EX' then returns the error message together with the error occurrence condition and other information, ifpossible. EasyLoadErrorMessageEx() may return a different error message relative to the same error code, depending on the situation.

(In) Error code returned by 'Pro-Server EX' function (Out) String type variable that stores converted character string Return valueNormal end: Other than 0 Failure in character string conversion: 0

Converts an error code returned by each API of 'Pro-Server EX' into an error message. 'Pro-Server EX' then returns the error message together with the error occurrence condition and other information, ifpossible. EasyLoadErrorMessageEx() may return a different error message relative to the same error code, depending on the situation.

(In) Pro-Server handle (In) Error code returned by 'Pro-Server EX' function (Out) String type variable that stores converted character string Return valueNormal end: Other than 0 Failure in character string conversion: 0

Converts an error code returned by each API of 'Pro-Server EX' into an error message.

(In) Error code returned by 'Pro-Server EX' function (Out) String type variable that stores converted character string Return valueNormal end: Other than 0 Failure in character string conversion: 0

Initializes a Pro-Server EX API, and declares use of the API internally. If you execute EasyInit() without starting 'Pro-Server EX', 'Pro-Server EX' will automatically start.

Normal end: 0 Abnormal end: Error code

This API is intended to ensure compatibility with older versions of 'Pro-Server'. With 'Pro-Server EX', you need not call this API. (Even if you call this API, it will not be executed.)

Normal end: 0 Abnormal end: Error code

Closes 'Pro-Server EX'. After calling this API, do not call any API of 'Pro-Server EX'. Before calling this API, be sure to discard Pro-Server handles etc.

Normal end: 0 Abnormal end: Error code

This API allows you to know the 'Pro-Server EX' closing status. When 'Pro-Server EX' starts closing processing, it sends a specified message to the window registered with this API byusing PostMessage() of Windows API. When the application receives the message from the window, it recognizes that 'Pro-Server EX' will be immediatelyclosed.

(In) Window that receives a closing message. (In) Message ID to be sent as a closing message. Normal end: 0 Abnormal end: Error code

This API allows you to know the 'Pro-Server EX' closing status. When 'Pro-Server EX' starts closing processing, it sends a specified message to the window registered with this API byusing PostMessage() of Windows API. When the application receives the message from the window, it recognizes that 'Pro-Server EX' will be immediatelyclosed.

(In) Window that receives a closing message. (In) Message ID to be sent as a closing message. (In) WPARAM to be sent together with the message (Value of WPARAM in PostMessage()) Normal end: 0 Abnormal end: Error code

This API allows you to know the 'Pro-Server EX' closing status. When 'Pro-Server EX' starts closing processing, it sends a specified message to the window registered with this API byusing PostMessage() of Windows API. When the application receives the message from the window, it recognizes that 'Pro-Server EX' will be immediatelyclosed.

(In) Window that receives a closing message. (In) Message ID to be sent as a closing message. (In) WPARAM to be sent together with the message (Value of WPARAM in PostMessage()) (In) LPARAM to be sent together with the message (Value of LPARAM in PostMessage()) Normal end: 0 Abnormal end: Error code

This API allows you to know the 'Pro-Server EX' closing status. When 'Pro-Server EX' starts closing processing, it sends a specified message to the window registered with this API byusing PostMessage() of Windows API. When the application receives the message from the window, it recognizes that 'Pro-Server EX' will be immediatelyclosed.

(In) Pro-Server handle (In) Window that receives a closing message. (In) Message ID to be sent as a closing message. Normal end: 0 Abnormal end: Error code

This API allows you to know the 'Pro-Server EX' closing status. When 'Pro-Server EX' starts closing processing, it sends a specified message to the window registered with this API byusing PostMessage() of Windows API. When the application receives the message from the window, it recognizes that 'Pro-Server EX' will be immediatelyclosed.

(In) Pro-Server handle (In) Window that receives a closing message. (In) Message ID to be sent as a closing message. (In) WPARAM to be sent together with the message (Value of WPARAM in PostMessage()) Normal end: 0 Abnormal end: Error code

This API allows you to know the 'Pro-Server EX' closing status. When 'Pro-Server EX' starts closing processing, it sends a specified message to the window registered with this API byusing PostMessage() of Windows API. When the application receives the message from the window, it recognizes that 'Pro-Server EX' will be immediatelyclosed.

(In) Pro-Server handle (In) Window that receives a closing message. (In) Message ID to be sent as a closing message. (In) WPARAM to be sent together with the message (Value of WPARAM in PostMessage()) (In) LPARAM to be sent together with the message (Value of LPARAM in PostMessage()) Normal end: 0 Abnormal end: Error code

Most of the Pro-Server EX APIs (functions) process Windows messages during the processing of a function if the processing time would be long. This API can specify whether to execute or inhibit the Windows message processing. When Windows message processing is inhibited, the relevant Windows message is stored in the message queue, and will not be processed during execution of a function. As a result, you will not call a function over again by clicking the icon during execution of the function. In this case, however, the processing of all the Windows messages as well as an "icon click" message, will be inhibited, and the processing of important messages for timer and window re-drawing is also disabled. You can specify whether to execute or inhibit the processing of Windows messages for each Pro-Server EX handle. With the default setting, message processing has been set to "Execute".

(In) To execute message processing, specify "1".To inhibit message processing, specify "2". Normal end: 0 Abnormal end: Error code

Most of the Pro-Server EX APIs (functions) process Windows messages during the processing of a function if the processing time would be long. This API can specify whether to execute or inhibit the Windows message processing. When Windows message processing is inhibited, the relevant Windows message is stored in the message queue, and will not be processed during execution of a function. As a result, you will not call a function over again by clicking the icon during execution of the function. In this case, however, the processing of all the Windows messages as well as an "icon click" message, will be inhibited, and the processing of important messages for timer and window re-drawing is also disabled. You can specify whether to execute or inhibit the processing of Windows messages for each Pro-Server EX handle. With the default setting, message processing has been set to "Execute".

(In) Pro-Server handle (In) To execute message processing, specify "1".To inhibit message processing, specify "2". Normal end: 0 Abnormal end: Error code

Acquires the current message processing mode during a call of a Pro-Server EX API.

1: Executes messageprocessing. 2: Inhibits messageprocessing.

Acquires the current message processing mode during a call of a Pro-Server EX API. The Multi-Handle API returns the current message processing mode for each handle.

(In) Handle subjected to status acquisition 1: Executes messageprocessing. 2: Inhibits messageprocessing.

A specific message is recorded. You can see the recorded information through the log viewer

(In) Event type (In) Character string indicating event occurrence position (NULL-terminated) (In) Character string of the message to be recorded (NULL-terminated) Normal end: 0 Abnormal end: Error code

Clears the information recorded by EasyOutputLog().

Normal end: 0 Abnormal end: Error code

Data reading of 16 bits When cash exists, the value is returned.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Data reading of 16 bits( multi steering wheel system ) When cash exists, the value is returned.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Data reading of 16 bits Cash is not used.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Data reading of 16 bits( multi steering wheel system ) Cash is not used.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Data reading of 32 bits When cash exists, the value is returned.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Data reading of 32 bits( multi steering wheel system ) When cash exists, the value is returned.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Data reading of 32 bits Cash is not used.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Data reading of 32 bits( multi steering wheel system ) Cash is not used.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data reading of 16 bits When cash exists, the value is returned.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data reading of 16 bits Cash is not used.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data reading of 16 bits( multi steering wheel system ) Cash is not used.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data reading of 16 bits( multi steering wheel system ) When cash exists, the value is returned.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data reading of 32 bits When cash exists, the value is returned.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data reading of 32 bits Cash is not used.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data reading of 32 bits( multi steering wheel system ) Cash is not used.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data reading of 32 bits( multi steering wheel system ) When cash exists, the value is returned.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BIT form data reading When cash exists, the value is returned.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BIT form data reading Cash is not used.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BIT form data reading( multi steering wheel system ) Cash is not used.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

BIT form data reading( multi steering wheel system ) When cash exists, the value is returned.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of double precision data reading When cash exists, the value is returned.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of double precision data reading Cash is not used.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of double precision data reading( multi steering wheel system ) Cash is not used.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of double precision data reading( multi steering wheel system ) When cash exists, the value is returned.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of single precision data reading When cash exists, the value is returned.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of single precision data reading Cash is not used.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of single precision data reading( multi steering wheel system ) Cash is not used.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of single precision data reading( multi steering wheel system ) When cash exists, the value is returned.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Character-string data reading When cash exists, the value is returned.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Character-string data reading Cash is not used.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Character-string data reading( multi steering wheel system ) Cash is not used.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

Character-string data reading( multi steering wheel system ) When cash exists, the value is returned.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count Normal end: 0 Abnormal end: Error code

General-purpose data(Object) reading When cash exists, the value is returned.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) reading Cash is not used.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) reading( multi steering wheel system ) Cash is not used.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) reading( multi steering wheel system ) When cash exists, the value is returned.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (Out) Variable that stores read data (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) reading When cash exists, the value is returned.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name (Out) Variable that stores read data Normal end: 0 Abnormal end: Error code

General-purpose data(Object) reading Cash is not used.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name (Out) Variable that stores read data Normal end: 0 Abnormal end: Error code

General-purpose data(Object) reading( multi steering wheel system ) Cash is not used.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name (Out) Variable that stores read data Normal end: 0 Abnormal end: Error code

General-purpose data(Object) reading( multi steering wheel system ) When cash exists, the value is returned.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name (Out) Variable that stores read data Normal end: 0 Abnormal end: Error code

Data writing of 16 bits When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Data writing of 16 bits The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Data writing of 16 bits( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Data writing of 16 bits( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Data writing of 32 bits When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Data writing of 32 bits The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Data writing of 32 bits( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Data writing of 32 bits( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data writing of 16 bits The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data writing of 16 bits( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data writing of 16 bits( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data writing of 32 bits When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data writing of 32 bits The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data writing of 32 bits( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

BCD form data writing of 32 bits( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Bit form data writing When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Bit form data writing The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Bit form data writing( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Bit form data writing( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of double precision data writing When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of double precision data writing The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of double precision data writing( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of double precision data writing( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of single precision data writing When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of single precision data writing The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of single precision data writing( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Floating point of single precision data writing( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Character-string data writing When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Character-string data writing The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Character-string data writing( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

Character-string data writing( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name or the device address (In) Variable where written data is stored (In) Data count (In) Please specify the value of eEASY_AppKind. Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name (In) Variable where written data is stored Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing When cash exists, the value is updated

(In) Name of entry node with Device/PLC name (In) Specify the symbol name (In) Variable where written data is stored Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name (In) Variable where written data is stored Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing The value of cash is not updated.

(In) Name of entry node with Device/PLC name (In) Specify the symbol name (In) Variable where written data is stored Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name (In) Variable where written data is stored Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing( multi steering wheel system ) The value of cash is not updated.

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name (In) Variable where written data is stored Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name (In) Variable where written data is stored Normal end: 0 Abnormal end: Error code

General-purpose data(Object) writing( multi steering wheel system ) When cash exists, the value is updated

(In) Pro-Server handle (In) Name of entry node with Device/PLC name (In) Specify the symbol name (In) Variable where written data is stored Normal end: 0 Abnormal end: Error code

After this API is called, 'Pro-Server EX' queues device read requests until ExecuteQueuingAccess() is called.

Normal end: 0 Abnormal end: Error code

After this API is called, 'Pro-Server EX' queues device read requests until ExecuteQueuingAccess() is called. Queuing is executed for each Pro-Server handle.

(In) Pro-Server handle Normal end: 0 Abnormal end: Error code

After this API is called, 'Pro-Server EX' queues device write requests until ExecuteQueuingAccess() is called.

Normal end: 0 Abnormal end: Error code

After this API is called, 'Pro-Server EX' queues device write requests until ExecuteQueuingAccess() is called. Queuing is executed for each Pro-Server handle.

(In) Pro-Server handle Normal end: 0 Abnormal end: Error code

Accesses device data according to the device read/write request in queue.

Normal end: 0 Abnormal end: Error code

Accesses device data according to the device read/write request in queue.

(In) Pro-Server handle Normal end: 0 Abnormal end: Error code

Discards the device read/write request in queue.

Normal end: 0 Abnormal end: Error code

Discards the device read/write request in queue.

(In) Pro-Server handle Normal end: 0 Abnormal end: Error code

Checks whether or not each device access request has been successfully executed, after ExecuteQueuingAccess() is called.

(In) Number of request to be checked Normal end: 0 Abnormal end: Error code

Checks whether or not each device access request has been successfully executed, after ExecuteQueuingAccess() is called.

(In) Pro-Server handle (In) Number of request to be checked Normal end: 0 Abnormal end: Error code

To increase the device read processing speed, 'Pro-Server EX' incorporates the device data caching function (with copyfunction). This API is used to create a cache buffer. This API only defines a cache buffer. To define which device to cache, use PS_EntryCacheRecord().

(In) Cache buffer name (In) To select the constant monitoring method, specify "0". The cache buffer is updated as fast as possible. If you specify any value other than i0i, the polling method is selected. Specify the polling cycle (cache updating cycle) by the millisecond. Normal end: 0 Abnormal end: Error code

To increase the device read processing speed, 'Pro-Server EX' incorporates the device data caching function (with copyfunction). This API is used to create a cache buffer. This API only defines a cache buffer. To define which device to cache, use PS_EntryCacheRecord().

(In) Pro-Server handle (In) Cache buffer name (In) To select the constant monitoring method, specify "0". The cache buffer is updated as fast as possible. If you specify any value other than i0i, the polling method is selected. Specify the polling cycle (cache updating cycle) by the millisecond. Normal end: 0 Abnormal end: Error code

Registers a caching device (cache source device) into the cache buffer created with PS_CreateCache().

(In) Cache buffer name (In) Entry node name with cache source Device/PLC name (In) Cache source device (In) Source device data type (In) Device data quantity subjected to caching Normal end: 0 Abnormal end: Error code

Registers a caching device (cache source device) into the cache buffer created with PS_CreateCache().

(In) Pro-Server handle (In) Cache buffer name (In) Entry node name with cache source Device/PLC name (In) Cache source device (In) Source device data type (In) Device data quantity subjected to caching Normal end: 0 Abnormal end: Error code

Starts caching.

(In) Name of cache buffer to start Normal end: 0 Abnormal end: Error code

Starts caching.

(In) Pro-Server handle (In) Name of cache buffer to start Normal end: 0 Abnormal end: Error code

Temporarily stops caching. Caching stops, but definition of the cache buffer is retained. To restart caching, call PS_StartCache().

(In) Name of cache buffer to stop Normal end: 0 Abnormal end: Error code

Temporarily stops caching. Caching stops, but definition of the cache buffer is retained. To restart caching, call PS_StartCache().

(In) Pro-Server handle (In) Name of cache buffer to stop Normal end: 0 Abnormal end: Error code

Checks caching status.

(In) Name of cache buffer to be checked 0 : The cache buffer has been created, but notstarted yet. 1 : Caching in progress 2 : Caching under suspension XX: Error code

Checks caching status.

(In) Pro-Server handle (In) Name of cache buffer to be checked 0 : The cache buffer has been created, but notstarted yet. 1 : Caching in progress 2 : Caching under suspension XX: Error code

Stops caching, and discards the cache buffer.

(In) Name of cache buffer to be discarded Normal end: 0 Abnormal end: Error code

Stops caching, and discards the cache buffer.

(In) Pro-Server handle (In) Name of cache buffer to be discarded Normal end: 0 Abnormal end: Error code

Sets the function to notify cache buffer update status to a specified window. After these settings are normally completed, the API returns the ID that identifies the currently-set notification function.

(In) Cache buffer name (In) Handle for the window to receive the message (In) Message ID to be sent to the window (In) WPARAM value to be sent to the window together with message ID (In) LPARAM value to be sent to the window together with message ID (Out) Returns the ID that identifies the currently set notification function. Normal end: 0 Abnormal end: Error code

Sets the function to notify cache buffer update status to a specified window. After these settings are normally completed, the API returns the ID that identifies the currently-set notification function.

(In) Pro-Server handle (In) Cache buffer name (In) Handle for the window to receive the message (In) Message ID to be sent to the window (In) WPARAM value to be sent to the window together with message ID (In) LPARAM value to be sent to the window together with message ID (Out) Returns the ID that identifies the currently set notification function. Normal end: 0 Abnormal end: Error code

Accepts the next cache update notification.

(In) ID of next message acceptance notification function Normal end: 0 Abnormal end: Error code

Accepts the next cache update notification.

(In) Pro-Server handle (In) ID of next message acceptance notification function Normal end: 0 Abnormal end: Error code

Cancels the function for sending a cache buffer update message to a specified window.

(In) ID of the notification function to be canceled Normal end: 0 Abnormal end: Error code

Cancels the function for sending a cache buffer update message to a specified window.

(In) Pro-Server handle (In) ID of the notification function to be canceled Normal end: 0 Abnormal end: Error code

Returns a cache buffer update count.

(In) Name of cache buffer to be monitored (Out) Cache buffer update count Normal end: 0 Abnormal end: Error code

Returns a cache buffer update count.

(In) Pro-Server handle (In) Name of cache buffer to be monitored (Out) Cache buffer update count Normal end: 0 Abnormal end: Error code

Reads the Specification data stored in the SRAM of a GP Series node, and saves the data into a file on the PC. Filing data are saved in binary format, and other types of data are saved in CSV format.

(In) File path of the file to save read data. (In) Name of read data source node.(Pro-Server EX nodes cannot be specified ) (In) Please select it from eEASY_BackupDataType. (In) Specified Saving mode in eEASY_BackupData_SaveMode Normal end: 0 Abnormal end: Error code

Reads the Specification data stored in the SRAM of a GP Series node, and saves the data into a file on the PC. Filing data are saved in binary format, and other types of data are saved in CSV format.

(In) File path of the file to save read data. (In) Name of read data source node.(Pro-Server EX nodes cannot be specified ) (In) Please select it from eEASY_BackupDataType. (In) Specified Saving mode in eEASY_BackupData_SaveMode Normal end: 0 Abnormal end: Error code Unlike EasyBackupDataRead(), this API enables access to extended data for the GP3000 Series and WinGP.

Reads the Specification data stored in the SRAM of a GP Series node, and saves the data into a file on the PC. Filing data are saved in binary format, and other types of data are saved in CSV format.

(In) File path of the file to save read data. (In) Name of read data source node.(Pro-Server EX nodes cannot be specified ) (In) Please select it from eEASY_BackupDataType. (In) Specified Saving mode in eEASY_BackupData_SaveMode (In) Data type that gives priority This argument is valid when sSaveFileName specifies a file of the GP3000Series and WinGP. For a file of the GP Series, this argument is ignored. In addition, the meaning of this argument varies depending on the value of iBackupDataType. Normal end: 0 Abnormal end: Error code Unlike EasyBackupDataRead(), this API enables access to extended data for the GP3000 Series and WinGP.

Reads the Specification data stored in the SRAM of a GP Series node, and saves the data into a file on the PC. Filing data are saved in binary format, and other types of data are saved in CSV format.

(In) File path of the file to save read data. (In) Name of read data source node.(Pro-Server EX nodes cannot be specified ) (In) Please select it from eEASY_BackupDataType. (In) Specified Saving mode in eEASY_BackupData_SaveMode (In) Data type that gives priority This argument is valid when sSaveFileName specifies a file of the GP3000Series and WinGP. For a file of the GP Series, this argument is ignored. In addition, the meaning of this argument varies depending on the value of iBackupDataType. (In) Reserve Always specify "0". Normal end: 0 Abnormal end: Error code Unlike EasyBackupDataRead(), this API enables access to extended data for the GP3000 Series and WinGP.

Reads the Specification data stored in the SRAM of a GP Series node, and saves the data into a file on the PC. Filing data are saved in binary format, and other types of data are saved in CSV format.

(In) Pro-Server handle (In) File path of the file to save read data. (In) Name of read data source node.(Pro-Server EX nodes cannot be specified ) (In) Please select it from eEASY_BackupDataType. (In) Specified Saving mode in eEASY_BackupData_SaveMode Normal end: 0 Abnormal end: Error code Unlike EasyBackupDataRead(), this API enables access to extended data for the GP3000 Series and WinGP.

Reads the Specification data stored in the SRAM of a GP Series node, and saves the data into a file on the PC. Filing data are saved in binary format, and other types of data are saved in CSV format.

(In) Pro-Server handle (In) File path of the file to save read data. (In) Name of read data source node.(Pro-Server EX nodes cannot be specified ) (In) Please select it from eEASY_BackupDataType. (In) Specified Saving mode in eEASY_BackupData_SaveMode (In) Data type that gives priority This argument is valid when sSaveFileName specifies a file of the GP3000Series and WinGP. For a file of the GP Series, this argument is ignored. In addition, the meaning of this argument varies depending on the value of iBackupDataType. Normal end: 0 Abnormal end: Error code Unlike EasyBackupDataRead(), this API enables access to extended data for the GP3000 Series and WinGP.

Reads the Specification data stored in the SRAM of a GP Series node, and saves the data into a file on the PC. Filing data are saved in binary format, and other types of data are saved in CSV format.

(In) Pro-Server handle (In) File path of the file to save read data. (In) Name of read data source node.(Pro-Server EX nodes cannot be specified ) (In) Please select it from eEASY_BackupDataType. (In) Specified Saving mode in eEASY_BackupData_SaveMode (In) Data type that gives priority This argument is valid when sSaveFileName specifies a file of the GP3000Series and WinGP. For a file of the GP Series, this argument is ignored. In addition, the meaning of this argument varies depending on the value of iBackupDataType. (In) Reserve Always specify "0". Normal end: 0 Abnormal end: Error code Unlike EasyBackupDataRead(), this API enables access to extended data for the GP3000 Series and WinGP.

Reads the Specification data stored in the SRAM of a GP Series node, and saves the data into a file on the PC. Filing data are saved in binary format, and other types of data are saved in CSV format.

(In) Pro-Server handle (In) File path of the file to save read data. (In) Name of read data source node.(Pro-Server EX nodes cannot be specified ) (In) Please select it from eEASY_BackupDataType. (In) Specified Saving mode in eEASY_BackupData_SaveMode Normal end: 0 Abnormal end: Error code

Writes specified filing data in binary format into the SRAM of a GP Series node.

(In) File path of binary-formatted filing data to be written (In) Name of entry node to write data. ( Pro-Server EX nodes, GP3000 Series nodes or WinGP nodes cannot be specified) (In) Fixed to "1". ("1" indicates filing data.) Normal end: 0 Abnormal end: Error code

Writes specified filing data in binary format into the SRAM of a GP Series node.

(In) Pro-Server handle (In) File path of binary-formatted filing data to be written (In) Name of entry node to write data. ( Pro-Server EX nodes, GP3000 Series nodes or WinGP nodes cannot be specified) (In) Fixed to "1". ("1" indicates filing data.) Normal end: 0 Abnormal end: Error code

Acquires connection status of the CF card in a connected GP.

(In) Name of GP node to read status (This node name must be pre-registered in a network project.) State of CF card

Acquires connection status of the CF card in a connected GP.

(In) Pro-Server handle (In) Name of GP node to read status (This node name must be pre-registered in a network project.) State of CF card

Outputs a list of files from the CF card inserted in a GP node into a file specified with the parameter. Only the file list in the directory specified with "sDirectory" can be output.

(In) Name of GP node to output file list (In) Name of directory to output list (All capitals) (Out) Number of output files (In) Name of file to save output directory information. Normal end: 0 Abnormal end: Error code

Outputs a list of files from the CF card inserted in a GP node into a file specified with the parameter. You can specify an optional file to save the file list.

(In) Name of GP node to output file list (In) Name of folder to receive file list (All capitals) (Out) Number of output files (In)Name of file to save output directory information. Normal end: 0 Abnormal end: Error code

Reads a specified file from the CF card. Only the file type specified with "pReadFileType" can be read.

(In) Name of GP node to read file (In) Type of source file to be read from CF card (In) File number of source file to be read from CF card (In) File name preservation of read CF file ahead (Out) Size of read CF file Normal end: 0 Abnormal end: Error code

Reads a specified file from the CF card. You can specify an optional file to read.

(In) Name of GP node to read file (In) Name of folder containing source file to be read from CF card (Up to 32 single-byte characters) (In) Name of source file to be read from CF card (Up to 8.3 format character string) (In) File name preservation of read CF file ahead (Out) Size of read CF file Normal end: 0 Abnormal end: Error code

Writes a specified file into the CF card. Only the file type specified with "pWriteFileType" can be written.

(In) Name of GP node to write file (In) Name of source file to be written into CF card (Full path) (In) Type of target file in CF card (In) File number of target file in CF card Normal end: 0 Abnormal end: Error code

Writes a specified file into the CF card. You can specify an optional file to write.

(In) Name of GP node to write file (In) Name of source file to be written into CF card (Full path) (In) Name of folder containing target file in CF card (Up to 32 single-byte characters) (In) Name of target file in CF card (Up to 8.3 format character string) Normal end: 0 Abnormal end: Error code

Deletes a specified file from the CF card. Only the file type specified with "pDeleteFileType" can be deleted.

(In) Name of GP node containing file to be deleted (In) Type of file to be deleted from CF card (In) File number to be deleted from CF card Normal end: 0 Abnormal end: Error code

Deletes a specified file from the CF card. You can specify an optional file to delete.

(In) Name of GP node containing file to be deleted (In) Name of folder containing file to be deleted from CF card (Up to 32 single-byte characters) (In) Name of file to be deleted from CF card (Up to 8.3 format character string) Normal end: 0 Abnormal end: Error code

Renames a specified file in the CF card.

(In) Name of GP node to write file (In) Name of folder containing file to be renamed in CF card (Up to 32 singlebyte characters) (In) Name to file to be renamed in CF card (Up to 8.3 format character string) (In)New file name (Up to 8.3 format character string) Normal end: 0 Abnormal end: Error code

Acquires information on empty space in the CF card connected to a specified entry node.

(In) Name of GP node to output free space (Out) Empty space in CF card (number of bytes) Normal end: 0 Abnormal end: Error code

'Pro-Server EX' uses a special protocol to access the CF card in a GP Series node. However, to access a GP3000 Series node and WinGP node, FTP protocol is used. For FTP protocol, 'Pro-Server EX' supports two modes: normal mode and passive mode. This API specifies the mode of FTP protocol.

(In) 0: Normal mode Other than 0: Passive mode Normal end: 0 Abnormal end: Error code

Acquires current time of a specified node as a DWORD-type value. This function is valid only for the time saved in 6 words from LS2048.

(In) Name of target node (A Pro-Server EX node cannot be specified.) (Out) Acquired time (Time is acquired as a value of DWORD type, (substantially, time_t type defined by ANSI).) Normal end: 0 Abnormal end: Error code

Acquires current time of a specified node as an character string. This function is valid only for the time saved in 6 words from LS2048.

(In) Name of target node (A Pro-Server EX node cannot be specified.) (In) String to specify the format of time to be acquired as a string. (Out) Time acquired as a string Normal end: 0 Abnormal end: Error code

Acquires current time of a specified node as a Object-type character string. This function is valid only for the time saved in 6 words from LS2048.

(In) Name of target node (A Pro-Server EX node cannot be specified.) (In) String to specify the format of time to be acquired as a string. (Out) Time acquired as a string Normal end: 0 Abnormal end: Error code

Acquires current time of a specified node as a Object-type value. This function is valid only for the time saved in 6 words from LS2048.

(In) Name of target node (A Pro-Server EX node cannot be specified.) (Out) Acquired time (Time is acquired as a value of Object type. Internal possessing format is "Date".) Normal end: 0 Abnormal end: Error code

Acquires connected GP node status. Since the response time-out value can be changed, this function can be used to check connection status.

(In) Name of GP node to read status (In) Response time-out setting value(If "0" is specified, it is set to the default value of 3000 ms.) (Out) GP model code (Out) GP system version (Out) PLC protocol driver version (Out) 2Way driver version ( For Pro-Server EX nodes or GP3000 Series nodes/WinGP nodes, this item is blank.) Normal end: 0 Abnormal end: Error code

Acquires connected GP node status. Since the response time-out value can be changed, this function can be used to check connection status.

(In) Pro-Server handle (In) Name of GP node to read status (In) Response time-out setting value(If "0" is specified, it is set to the default value of 3000 ms.) (Out) GP model code (Out) GP system version (Out) PLC protocol driver version (Out) PLC protocol driver version ( For Pro-Server EX nodes or GP3000 Series nodes/WinGP nodes, this item is blank.) Normal end: 0 Abnormal end: Error code

Acquires the number of members of a group or symbol sheet (total number of symbols and group members).

(In) Name of entry node with Device/PLC name (In) Name of target group symbol or symbol sheet (Out) Number of members acquired Normal end: 0 Abnormal end: Error code When a group symbol exists in a specified group symbol, the number of members is counted as one, even if multiple device symbols exist in the inner group symbol.

Acquires definition information (data type, data quantity, etc.)

(In) Name of entry node with Device/PLC name (In) Name of symbol/group/symbol sheet (In) Specify a value of the maximum count of desired information + 1. (Out) The API returns the name of symbol sheet that contains the symbol specified with sSymbolName. (Out) The API returns acquired detail information in the alignment structure. (Out) The API returns the information quantity that has returned to oSymbolInformation. Normal end: 0 Abnormal end: Error code

struct SymbolInformation

Data type, Symbol: 1 to 12, Group: 0x8000

Data quantity

Number of bytes in buffer required for access

Name of symbol or group

Device address (For group, leave it blank.)

Structure that stores file list in CF card

File name (Terminated with "0")

File extension (Terminated with "0")

Dummy

File size

File timestamp (Terminated with "0")

Dummy

Data type

Bit Data

16-bit(Signed) Data

16-bit(Unsigned) Data

16-bit(HEX) Data

16-bit(BCD) Data

32-bit(Signed) Data

32-bit(Unsigned) Data

32-bit(HEX) Data

32-bit(BCD) Data

Single-precision floating point data

Double-precision floating point data

Character-string data

Handles bit data as Variant BOOL data per bit.

Indicates that the data type defined for a symbol is used with the API that can use the symbol as the device address.

Group symbol

Symbol sheet

The preservation method of the backup data is specified.

New (If a file with the same name already exists, 'Pro-Server EX' deletes the file, and overwrites it.)

Add (The read data is added to the end of an existing file. If there is no file to save the data, 'Pro-Server EX' creates a new file.)

Kind of backup data type

Data source node in GP Series : Filing data Data source node in GP3000 Series or WinGP : Filing data

Data source node in GP Series : Logging data Data source node in GP3000 Series or WinGP : Sampling data of sampling group No. 1

Data source node in GP Series : Line graph data Data source node in GP3000 Series or WinGP : Data of all sampling groups other than sampling group No. 1

Data source node in GP Series : Sampling data Data source node in GP3000 Series or WinGP : Data of all sampling groups other than sampling group No. 1

Data source node in GP Series : Alarm block 1 Data source node in GP3000 Series or WinGP : Alarm block 1

Data source node in GP Series : Alarm history or Alarm block 2 Data source node in GP3000 Series or WinGP : Alarm block 2

Data source node in GP Series : Alarm log or Alarm block 3 Data source node in GP3000 Series or WinGP : Alarm block 3

Data source node in GP Series : Alarm block 4 Data source node in GP3000 Series or WinGP : Alarm block 4

Data source node in GP Series : Alarm block 5 Data source node in GP3000 Series or WinGP : Alarm block 5

Data source node in GP Series : Alarm block 6 Data source node in GP3000 Series or WinGP : Alarm block 6

Data source node in GP Series : Alarm block 7 Data source node in GP3000 Series or WinGP : Alarm block 7

Data source node in GP Series : Alarm block 8 Data source node in GP3000 Series or WinGP : Alarm block 8

Data source node in GP Series : Alarm history or Alarm block 2 Data source node in GP3000 Series or WinGP : Alarm block 2

Data source node in GP Series : Alarm log or Alarm block 3 Data source node in GP3000 Series or WinGP : Alarm block 3

Data source node in GP Series : (Reserve) Data source node in GP3000 Series or WinGP : Sampling group of a specific group number Specify iNumber for group number.

Event type of log viewer

User program closing message

User program error message

User program detail message 1

User program detail message 2

User program starting message

User program warning message

System error message

System message

Class that uses it for Variant type access

Default constructor

constructor

Object data

The data of the Object type is converted into the Array type and it takes it out.

Data of Array type

The object type data is taken out.

object type data

If the data type that returns the data of the String type is not String if the data type of Object is string type, NULL is returned.

Data of String type

The Object type data is set

Object type data