Name=Inverter Varispeed AC MaxSigCnt=0 DataFormat=Hex [SigData] 0001 Frequency reference 0002 Frequency reference (Set units using constant o1-03) 0006 PID target value 0007 Analog output 1 setting (-11 V/-1540 to 11 V/1540) 0008 Analog output 2 setting (-11 V/-1540 to 11 V/1540) 0009 Multi-function contact output setting 000F Reference selection settings 0020 Inverter status 0021 Error details 0022 Data link status 0023 Frequency reference (U1-01) 0024 Output frequency (U1-02) 0025 Output voltage reference (U1-06) 0026 Output current (U1-03) 0027 Output power (U1-08) 0028 Torque reference (U1-09) 002B Sequence input status 002C Inverter status 002D Multi-function contact output status 0031 Main circuit DC voltage 0032 Torque monitor 0033 Output power (U1-08) 0034 Input power voltage (U1-54) 0035 Input power frequency (U1-55) 0036 Input power information (U1-56) 0038 PID feedback quantity (Input equivalent to 100%/Max. output frequency; 10/1%; without sign) 0039 PID input quantity (±100%/±Max. output frequency; 10/1%; with sign) 003A PID output quantity (±100%/±Max. output frequency; 10/1%; with sign) 003B CPU software number 003C Flash software number 003D Communications error details 003E kVA setting 003F Control method 0900 Write constant data to EEPROM 0910 Constant data is not written to EEPROM, but refreshed in RAM only. 0100 A1-00 Language selection for Digital Operator display 0101 A1-01 Constant access level 0102 A1-02 Control mode selection 0103 A1-03 Initialize 0104 A1-04 Password 0105 A1-05 Password setting 0106 A2-01 User setting constants 0107 A2-02 User setting constants 0108 A2-03 User setting constants 0109 A2-04 User setting constants 010A A2-05 User setting constants 010B A2-06 User setting constants 010C A2-07 User setting constants 010D A2-08 User setting constants 010E A2-09 User setting constants 010F A2-10 User setting constants 0110 A2-11 User setting constants 0111 A2-12 User setting constants 0112 A2-13 User setting constants 0113 A2-14 User setting constants 0114 A2-15 User setting constants 0115 A2-16 User setting constants 0116 A2-17 User setting constants 0117 A2-18 User setting constants 0118 A2-19 User setting constants 0119 A2-20 User setting constants 011A A2-21 User setting constants 011B A2-22 User setting constants 011C A2-23 User setting constants 011D A2-24 User setting constants 011E A2-25 User setting constants 011F A2-26 User setting constants 0120 A2-27 User setting constants 0121 A2-28 User setting constants 0122 A2-29 User setting constants 0123 A2-30 User setting constants 0124 A2-31 User setting constants 0125 A2-32 User setting constants 0180 b1-01 Reference selection 0181 b1-02 Operation method selection 0182 b1-03 Stopping method selection 0183 b1-04 Prohibition of reverse operation 0184 b1-05 Operation selection for setting E1-09 or less 0185 b1-06 Read sequence input twice 0186 b1-07 Operation selection after operation reference switched 0187 b1-08 PRG mode operation reference selection 0189 b2-01 Zero-speed level (DC injection braking starting frequency) 018A b2-02 DC injection braking current 018B b2-03 DC injection braking time at start 018C b2-04 DC injection braking time at stop 0190 b2-08 Magnetic flux compensation volume 0191 b3-01 Speed search selection 0192 b3-02 Speed search operating current (current detection) 0193 b3-03 Speed search deceleration time (current detection) 0195 b3-05 Speed search wait time 019A b3-10 Speed search detection correction gain 019E b3-14 Rotation direction search selection 01A3 b4-01 Timer function ON-delay time 01A4 b4-02 Timer function OFF-delay time 01A5 b5-01 PID control method selection 01A6 b5-02 Proportional gain (P) 01A7 b5-03 Integral (I) time 01A8 b5-04 Integral (I) limit 01A9 b5-05 Derivative (D) time 01AA b5-06 PID limit 01AB b5-07 PID offset adjustment 01AC b5-08 PID primary delay time constant 01AD b5-09 PID output characteristics selection 01AE b5-10 PID output gain 01AF b5-11 PID reverse output selection 01B0 b5-12 Selection of PID feedback command loss detection 01B1 b5-13 PID feedback command loss detection level 01B2 b5-14 PID feedback command loss detection time 01B3 b5-15 PID sleep function operation level 01B4 b5-16 PID sleep operation delay time 01B5 b5-17 Accel/decel time for PID reference 01B6 b6-01 Dwell frequency at start 01B7 b6-02 Dwell time at start 01B8 b6-03 Dwell frequency at stop 01B9 b6-04 Dwell time at stop 01CA b7-01 Droop control gain 01CB b7-02 Droop control delay time 01DA b9-01 Zero-servo gain 01DB b9-02 Zero-servo completion width 01F2 b3-19 Number of speed search retrials 0200 C1-01 Acceleration time 1 0201 C1-02 Deceleration time 1 0202 C1-03 Acceleration time 2 0203 C1-04 Deceleration time 2 0204 C1-05 Acceleration time 3 0205 C1-06 Deceleration time 3 0206 C1-07 Acceleration time 4 0207 C1-08 Deceleration time 4 0208 C1-09 Emergency stop time 0209 C1-10 Accel/decel time setting unit 020A C1-11 Accel/decel time switching frequency 020B C2-01 S-curve characteristic time at acceleration start 020C C2-02 S-curve characteristic time at acceleration end 020D C2-03 S-curve characteristic time at deceleration start 020E C2-04 S-curve characteristic time at deceleration end 020F C3-01 Slip compensation gain 0210 C3-02 Slip compensation primary delay time 0211 C3-03 Slip compensation limit 0212 C3-04 Slip compensation selection during regeneration 0213 C3-05 Output voltage limit operation selection 0215 C4-01 Torque compensation gain 0216 C4-02 Torque compensation primary delay time constant 0217 C4-03 Forward starting torque 0218 C4-04 Reverse starting torque 0219 C4-05 Starting torque time constant 021B C5-01 ASR proportional (P) gain 1 021C C5-02 ASR integral (I) time 1 021D C5-03 ASR proportional (P) gain 2 021E C5-04 ASR integral (I) time 2 0220 C5-06 ASR primary delay time 0221 C5-07 ASR switching frequency 0222 C5-08 ASR integral (I) limit 0224 C6-02 Carrier frequency selection 0280 d1-01 Frequency reference 1 0281 d1-02 Frequency reference 2 0282 d1-03 Frequency reference 3 0283 d1-04 Frequency reference 4 0284 d1-05 Frequency reference 5 0285 d1-06 Frequency reference 6 0286 d1-07 Frequency reference 7 0287 d1-08 Frequency reference 8 0288 d1-09 Frequency reference 9 028B d1-10 Frequency reference 10 028C d1-11 Frequency reference 11 028D d1-12 Frequency reference 12 028E d1-13 Frequency reference 13 028F d1-14 Frequency reference 14 0290 d1-15 Frequency reference 15 0291 d1-16 Frequency reference 16 0292 d1-17 Jog frequency reference 0289 d2-01 Frequency reference upper limit 028A d2-02 Frequency reference lower limit 0293 d2-03 Master speed reference lower limit 0294 d3-01 Jump frequency 1 0295 d3-02 Jump frequency 2 0296 d3-03 Jump frequency 3 0297 d3-04 Jump frequency width 0298 d4-01 Frequency reference hold function selection 0299 d4-02 + - Speed limits 029A d5-01 Torque control selection 029B d5-02 Torque reference delay time 029C d5-03 Speed limit selection 029D d5-04 Speed limit 029E d5-05 Speed limit bias 029F d5-06 Speed/torque control switching timer 02A0 d6-01 Field weakening level 02A1 d6-02 Field frequency 02A2 d6-03 Field forcing function selection 02A5 d6-06 Field forcing limit 0300 E1-01 Input voltage setting 0302 E1-03 V/f pattern selection 0303 E1-04 Max. output frequency 0304 E1-05 Max. voltage 0305 E1-06 Base frequency 0306 E1-07 Mid. output frequency 0307 E1-08 Mid. output frequency voltage 0308 E1-09 Min. output frequency 0309 E1-10 Min. output frequency voltage 030A E1-11 Mid. output frequency 2 030B E1-12 Mid. output frequency voltage 2 030C E1-13 Base voltage 030E E2-01 Motor rated current 030F E2-02 Motor rated slip 0310 E2-03 Motor noload current 0311 E2-04 Number of motor poles 0312 E2-05 Motor line-to-line resistance 0313 E2-06 Motor leak inductance 0314 E2-07 Motor iron saturation coefficient 1 0315 E2-08 Motor iron saturation coefficient 2 0316 E2-09 Motor mechanical loss 0317 E2-10 Motor iron loss for torque compensation 0318 E2-11 Motor rated output 0328 E2-12 Motor iron saturation coefficient 3 0319 E3-01 Motor 2 control method selection 031A E3-02 Motor 2 max. output frequency (FMAX) 031B E3-03 Motor 2 max. voltage (VMAX) 031C E3-04 Motor 2 max. voltage frequency (FA) 031D E3-05 Motor 2 mid. output frequency 1 (FB) 031E E3-06 Motor 2 mid. output frequency voltage 1 (VC) 031F E3-07 Motor 2 min. output frequency (FMIN) 0320 E3-08 Motor 2 min. output frequency voltage (VMIN) 0321 E4-01 Motor 2 rated current 0322 E4-02 Motor 2 rated slip 0323 E4-03 Motor 2 noload current 0324 E4-04 Motor 2 number of poles (number of poles) 0325 E4-05 Motor 2 line-to-line resistance 0326 E4-06 Motor 2 leak inductance 0327 E4-07 Motor 2 rated capacity 0380 F1-01 PG constant 0381 F1-02 Operation selection at PG open circuit (PGO) 0382 F1-03 Operation selection at overspeed (OS) 0383 F1-04 Operation selection at deviation 0384 F1-05 PG rotation 0385 F1-06 PG division rate 0387 F1-08 Overspeed detection level 0388 F1-09 Overspeed detection delay time 0389 F1-10 Excessive speed deviation detection level 038A F1-11 Excessive speed deviation detection delay time 038D F1-14 PG open-circuit detection time 038F F2-01 Operation selection of analog reference card 0390 F3-01 Digital reference card input selection 0391 F4-01 CH1 output monitor selection 0392 F4-02 CH1 output monitor gain 0393 F4-03 CH2 output monitor selection 0394 F4-04 CH2 output monitor gain 0395 F4-05 CH1 output monitor bias 0396 F4-06 CH2 output monitor bias 0397 F4-07 Analog output signal level for CH1 0398 F4-08 Analog output signal level for CH2 0399 F5-01 CH1 output selection 039A F5-02 CH2 output selection 039B F5-03 CH3 output selection 039C F5-04 CH4 output selection 039D F5-05 CH5 output selection 039E F5-06 CH6 output selection 039F F5-07 CH7 output selection 03A0 F5-08 CH8 output selection 03A1 F5-09 DO-08 output mode selection 03A2 F6-01 Operation selection after communications error 03A3 F6-02 Input level of external fault from Communications Option Board 03A4 F6-03 Stopping method for external fault from Communications Option Board 03A5 F6-04 Trace sampling from Communications Option Board 03A7 F6-06 Torque reference/torque limit selection from optical option 0400 H1-01 Terminal S3 function selection 0401 H1-02 Terminal S4 function selection 0402 H1-03 Terminal S5 function selection 0403 H1-04 Terminal S6 function selection 0404 H1-05 Terminal S7 function selection 0405 H1-06 Terminal S8 function selection 0406 H1-07 Terminal S9 function selection 0407 H1-08 Terminal S10 function selection 0408 H1-09 Terminal S11 function selection 0409 H1-10 Terminal S12 function selection 040B H2-01 Terminal M1-M2 function selection (contact) 040C H2-02 Terminal P1 function selection (open collector) 040D H2-03 Terminal P2 function selection (open collector) 040E H2-04 Terminal P3 function selection (open collector) 040F H2-05 Terminal P4 function selection (open collector) 0410 H3-01 Frequency reference (Voltage) terminal A1 signal level selection 0411 H3-02 Frequency reference (Voltage) terminal A1 input gain 0412 H3-03 Frequency reference (Voltage) terminal A1 input bias 0413 H3-04 Multi-function analog input terminal A3 signal level selection 0414 H3-05 Multi-function analog input terminal A3 function selection 0415 H3-06 Multi-function analog input terminal A3 input gain 0416 H3-07 Multi-function analog input terminal A3 input bias 0417 H3-08 Frequency reference (Current) terminal A2 signal level selection 0418 H3-09 Frequency reference (Current) terminal A2 function selection 0419 H3-10 Frequency reference (Current) terminal A2 input gain 041A H3-11 Frequency reference (Current) terminal A2 input bias 041B H3-12 Analog input filter time constant 041D H4-01 Multi-function analog output1 terminal FM monitor selection 041E H4-02 Multi-function analog output1 terminal FM output gain 041F H4-03 Multi-function analog output1 terminal FM bias 0420 H4-04 Multi-function analog output2 terminal AM monitor 0421 H4-05 Multi-function analog output2 terminal AM gain 0422 H4-06 Multi-function analog output2 terminal AM bias 0423 H4-07 Multi-function analog output1 signal level selection 0424 H4-08 Multi-function analog output2 signal level selection 0425 H5-01 Slave address 0426 H5-02 Communication speed selection 0427 H5-03 Communication parity selection 0428 H5-04 Operation method after communication error 0429 H5-05 Communication error detection selection 042A H5-06 Send wait time 042B H5-07 RTS control ON/OFF 0436 H5-10 MEMOBUS register(0025H) unit selection 0480 L1-01 Motor protection selection 0481 L1-02 Motor protection time constant 0482 L1-03 Alarm operation selection during motor overheating 0483 L1-04 Motor overheating operation selection 0484 L1-05 Motor temperature input filter time constant 0485 L2-01 Momentary power loss detection 0486 L2-02 Momentary power loss ridethru time 0487 L2-03 Min. baseblock time 0488 L2-04 Voltage recovery time 0489 L2-05 Undervoltage detection level 04CD L2-13 Input power supply frequency abnormality detection gain 04D5 L2-21 Input voltage low voltage (AUV) detection level 048F L3-01 Stall prevention selection during accel 0490 L3-02 Stall prevention level during accel 0491 L3-03 Stall prevention limit during accel/decel 0492 L3-04 Stall prevention selection during decel 0493 L3-05 Stall prevention selection during running 0494 L3-06 Stall prevention level during running 04E9 L3-14 Stall prevention level during decel 0499 L4-01 Frequency detection level 049A L4-02 Frequency detection width 049B L4-03 Frequency detection level (+/- one side detection) 049C L4-04 Frequency detection width (+/- one side detection) 049D L4-05 Operation selection when frequency reference is missing 049E L5-01 Abnormal retrying frequency 049F L5-02 Auto restart operation selection 04A1 L6-01 Overtorque/under torque detection operation selection 1 04A2 L6-02 Overtorque/under torque detection level 1 04A3 L6-03 Overtorque/under torque detection time 1 04A4 L6-04 Overtorque/under torque detection operation selection 2 04A5 L6-05 Overtorque/under torque detection level 2 04A6 L6-06 Overtorque/under torque detection time 2 04A7 L7-01 Forward drive torque limit 04A8 L7-02 Reverse drive torque limit 04A9 L7-03 Forward regenerative torque limit 04AA L7-04 Reverse regenerative torque limit 04AC L7-06 Integral time setting for torque limit 04C9 L7-07 Control method selection for torque limit during acceleration and deceleration 04AE L8-02 The previous notice of Matocon overheating (OH) alarm detection level 04AF L8-03 The previous notice of Matocon overheating (OH) alarm operation selection 04B3 L8-07 Output open-phase protection selection 04B5 L8-09 Ground protection selection 04B6 L8-10 Cooling fan control selection 04B7 L8-11 Cooling fan control delay time 04B8 L8-12 Ambient temperature 04BB L8-15 Low-speed OL2 characteristic selection 0580 N1-01 Hunting-prevention function selection 0581 N1-02 Hunting-prevention gain 0582 N1-03 Hunting-prevention constant 0584 N2-01 Speed feedback detection control (AFR) gain 0585 N2-02 Speed feedback detection control (AFR) time constant 0586 N2-03 Speed feedback detection control (AFR) time constant 2 05B0 N5-01 Feed forward control selection 05B1 N5-02 Motor acceleration time 05B2 N5-03 Feed forward proportional gain 0500 o1-01 Drive mode display item selection 0501 o1-02 Monitor selection after power up 0502 o1-03 Frequency units of reference setting and monitor 0503 o1-04 Setting unit for frequency constants related to V/f characteristics 0504 o1-05 LCD brightness adjustment 0505 o2-01 LOCAL/REMOTE key selection 0506 o2-02 STOP key selection 0507 o2-03 User constant initial value 0508 o2-04 Motor capacity selection 0509 o2-05 Frequency reference setting method selection 050A o2-06 Operation selection when digital operator is disconnected 050B o2-07 Cumulative operation time setting 050C o2-08 Cumulative operation time selection 050D o2-09 Initialization mode 050E o2-10 Setting at Fan operating time 0510 o2-12 Fault trace/fault history clear function 0512 o2-14 KWH monitor initialization selection 0515 o3-01 Copy function selection 0516 o3-02 Read permitted selection 0700 T1-00 Motor 1/2 selection 0701 T1-01 Autotuning mode selection 0702 T1-02 Motor output power 0703 T1-03 Motor rated voltage 0704 T1-04 Motor rated current 0705 T1-05 Motor base frequency 0706 T1-06 Number of motor poles 0707 T1-07 Motor base speed 0708 T1-08 Number of PG pulses when turning 0709 T1-09 Motor noload current 070A T1-10 Motor rated slipping 0040 U1-01 Frequency reference 0041 U1-02 Output frequency 0042 U1-03 Output current 0043 U1-04 Control mode 0044 U1-05 Motor speed 0045 U1-06 Output voltage 0046 U1-07 Control circuit voltage 0047 U1-08 Output power 0048 U1-09 Torque reference 0049 U1-10 Input terminal status 004A U1-11 Output terminal status 004B U1-12 Operation status 004C U1-13 Cumulative operation time 004D U1-14 Software No. (flash memory) 004E U1-15 Frequency reference (Voltage) Terminal A1 input voltage 004F U1-16 Multi-function analog Terminal A2 input voltage 0050 U1-17 Multi-function analog Terminal A3 input voltage 0051 U1-18 Motor secondary current (Iq) 0052 U1-19 Motor exciting current (Id) 0053 U1-20 Output frequency after soft-start 0054 U1-21 ASR input 0055 U1-22 ASR output 0057 U1-24 PID feedback value 0058 U1-25 D1-16H2 input state 0059 U1-26 Output voltage reference (Vq) 005A U1-27 Output voltage reference (Vd) 005B U1-28 Software No. (CPU) 005C U1-29 Output power lower 4 digits 005D U1-30 Output power upper 5 digits 005F U1-32 ACR output of q axis 0060 U1-33 ACR output of d axis 0061 U1-34 OPE fault constant 0062 U1-35 Zero-servo movement pulses 0063 U1-36 PID input volume 0064 U1-37 PID output volume 0065 U1-38 PID target value 0066 U1-39 MEMOBUS communications error code 0067 U1-40 Cooling fan operating time 006B U1-44 Feedback control (ASR) output (without filter) 006C U1-45 Feed forward control output 0075 U1-54 Input power voltage 0076 U1-55 Input power Frequency 0077 U1-56 Input power details 0080 U2-01 Current fault 0081 U2-02 Previous fault 0082 U2-03 Reference frequency at fault 0083 U2-04 Output frequency at fault 0084 U2-05 Output current at fault 0085 U2-06 Motor speed at fault 0086 U2-07 Output voltage reference at fault 0087 U2-08 Control circuit voltage at fault 0088 U2-09 Output power at fault 0089 U2-10 Torque reference at fault 008A U2-11 Input terminal status at fault 008B U2-12 Output terminal status at fault 008C U2-13 Operation status at fault 008D U2-14 Cumulative operation time at fault 0090 U3-01 Most recent fault 0091 U3-02 Second most recent fault 0092 U3-03 Third most recent fault 0093 U3-04 Fourth most recent fault 0094 U3-05 Cumulative operation time at fault 0095 U3-06 Accumulated time of second fault 0096 U3-07 Accumulated time of third fault 0097 U3-08 Accumulated time of fourth fault [SigDataEnd] [SigData]-B 0001.0 Forward Run/Stop Command 1: Forward run 0: Stop 0001.1 Reverse Run/Stop Command 1: Reverse run 0: Stop 0001.2 External fault 1: Error (EFO) 0001.3 Fault reset 1: Reset command 0001.4 ComNet 0001.5 ComCtrl 0001.6 Multi-function input command 3 0001.7 Multi-function input command 4 0001.8 Multi-function input command 5 0001.9 Multi-function input command 6 0001.A Multi-function input command 7 0001.B Multi-function input command 8 0001.C Multi-function input command 9 0001.D Multi-function input command 10 0001.E Multi-function input command 11 0001.F Multi-function input command 12 0002 Frequency reference (Set units using constant o1-03) 0006 PID target value 0007 Analog output 1 setting (-11 V/-1540 to 11 V/1540) 0008 Analog output 2 setting (-11 V/-1540 to 11 V/1540) 0009.0 Contact output (Terminal M1-M2) 1: ON 0: OFF 0009.1 PHC1(Contact P1-PC) 1: ON 0: OFF 0009.2 PHC2(Contact P2-PC) 1: ON 0: OFF 0009.3 PHC3(Contact P3-PC) 1: ON 0: OFF 0009.4 PHC4(Contact P4-PC) 1: ON 0: OFF 0009.6 Set error contact (terminal MA-MC) output using bit 7. 1: ON 0: OFF 0009.7 Error contact (terminal MA-MC) 1: ON 0: OFF 000F.1 Use MEMOBUS 0006H PID target value 1: Enabled 0: Disabled 000F.C Broadcast data terminal S5 input 1: Enabled 0: Disabled 000F.D Broadcast data terminal S6 input 1: Enabled 0: Disabled 000F.E Broadcast data terminal S7 input 1: Enabled 0: Disabled 000F.F Broadcast data terminal S8 input 1: Enabled 0: Disabled 0020.0 Operation 1: Operating 0: Stopped 0020.1 Reverse operation 1: Reverse operation 0: Forward operation 0020.2 Inverter startup complete 1: Completed 2: Not completed 0020.3 Error 1: Error 0020.4 Data setting error 1: Error 0020.5 Multi-function contact output (terminal M1 - M2) 1: ON 0: OFF 0020.6 Multi-function PHC output 1 (terminal P1 - PC) 1: ON 0: OFF 0020.7 Multi-function PHC output 2 (terminal P2 - PC) 1: ON 0: OFF 0020.8 Multi-function PHC output 3 (terminal P3 - C3) 1: ON 0: OFF 0020.9 Multi-function PHC output 4 (terminal P4 - C4) 1: ON 0: OFF 0021.0 Overcurrent (OC) Ground fault (GF) 0021.1 Control circuit overvoltage (OV) and input power supply overvoltage(AOV) 0021.2 Inverter overload (OL2) 0021.3 Inverter overheat (OH1, OH2) 0021.4 Resistance with built-in Matocon overheating(SOH,DOH) 0021.6 PID feedback reference lost (FbL) 0021.7 External fault (EF, EFO) 0021.8 Hardware error (CPF) 0021.9 Motor overload (OL1), overtorque 1 (OL3) detected, or overtorque 2 (OL4) detected 0021.A PG broken wire detected (PGO), Overspeed (OS), Speed deviation (DEV) 0021.B Control circuit under voltage(UV) detected, Input under voltage(AUV) detected, Power frequency fault(FDV) detected 0021.C Control circuit under voltage(UV1), Control power fault(UV2),Input power frequency fault(FDV), Input under voltage(AUV), Input power phase order fault(SRC) 0021.D Output Open-phase (LF) 0021.E MEMOBUS communications error 0021.F Operator disconnected (OPR) 0022.0 Writing data 0022.3 Upper and lower limit errors 0022.4 Data integrity error 0023 Frequency reference (U1-01) 0024 Output frequency (U1-02) 0025 Output voltage reference (U1-06) 0026 Output current (U1-03) 0027 Output power (U1-08) 0028 Torque reference (U1-09) 002B.0 1: Control circuit terminal S1 ON 002B.1 1: Control circuit terminal S2 ON 002B.2 1: Control circuit terminal S3 ON 002B.3 1: Control circuit terminal S4 ON 002B.4 1: Control circuit terminal S5 ON 002B.5 1: Control circuit terminal S6 ON 002B.6 1: Control circuit terminal S7 ON 002B.7 1: Control circuit terminal S8 ON 002B.8 1: Control circuit terminal S9 ON 002B.9 1: Control circuit terminal S10 ON 002B.A 1: Control circuit terminal S11 ON 002B.B 1: Control circuit terminal S12 ON 002C.0 Operation 1: Operating 002C.1 Zero-speed 1: Zero-speed 002C.2 Frequency matching 1: Matched 002C.3 User-defined speed matching 1: Matched 002C.4 Frequency detection 1 002C.5 Frequency detection 2 002C.6 Inverter startup completed 1: Startup completed 002C.7 Low voltage detection 1: Detected 002C.8 Baseblock 1: Inverter output baseblock 002C.9 Frequency reference mode 1: Not communications 0: Communications 002C.A Run Command mode 1: Not communications 0: Communications 002C.B Overtorque detection 1: Detected 002C.C Frequency reference lost 1: Lost 002C.D Retrying error 1: Retrying 002C.E Error (including MEMOBUS communications time-out) 1:Error occurred 002C.F MEMOBUS communications time-out 1: Timed out 002D.0 1: Multi-function contact output (terminal M1-M2) 1: ON 0: OFF 002D.1 1: Multi-function PHC output1 (terminal P1-PC) 1: ON 0: OFF 002D.2 1: Multi-function PHC output2 (terminal P2-PC) 1: ON 0: OFF 002D.3 1: Multi-function PHC output3 (terminal P3-C3) 1: ON 0: OFF 002D.4 1: Multi-function PHC output4 (terminal P4-C4) 1: ON 0: OFF 0031 Main circuit DC voltage 0032 Torque monitor 0033 Output power (U1-08) 0034 Input power voltage (U1-54) 0035 Input power frequency (U1-55) 0036.0 AUV released 0: Not completed 1: Completed 0036.1 Input Open-phase released 0: Not completed 1: Completed 0036.2 Rated frequency detection 0: Not completed 1: Completed 0036.3 Phase order detection completed 0: Not completed 1: Completed 0036.4 Power detection completed 0: Not completed 1: Completed 0036.5 Power frequency fault1 0: Normal 1: Abnormal 0036.6 Power frequency fault2 0: Normal 1: Abnormal 0036.7 Input Open-phase detection 0: Normal 1: Abnormal 0038 PID feedback quantity (Input equivalent to 100%/Max. output frequency; 10/1%; without sign) 0039 PID input quantity (±100%/±Max. output frequency; 10/1%; with sign) 003A PID output quantity (±100%/±Max output frequency; 10/1%; with sign) 003B CPU software number 003C Flash software number 003D.0 CRC error 003D.1 Invalid data length 003D.3 Parity error 003D.4 Overrun error 003D.5 Framing error 003D.6 Time-out 003E kVA setting 003F Control method 0900 Write constant data to EEPROM 0910 Constant data is not written to EEPROM, but refreshed in RAM only. 0100 A1-00 Language selection for Digital Operator display 0101 A1-01 Constant access level 0102 A1-02 Control mode selection 0103 A1-03 Initialize 0104 A1-04 Password 0105 A1-05 Password setting 0106 A2-01 User setting constants 0107 A2-02 User setting constants 0108 A2-03 User setting constants 0109 A2-04 User setting constants 010A A2-05 User setting constants 010B A2-06 User setting constants 010C A2-07 User setting constants 010D A2-08 User setting constants 010E A2-09 User setting constants 010F A2-10 User setting constants 0110 A2-11 User setting constants 0111 A2-12 User setting constants 0112 A2-13 User setting constants 0113 A2-14 User setting constants 0114 A2-15 User setting constants 0115 A2-16 User setting constants 0116 A2-17 User setting constants 0117 A2-18 User setting constants 0118 A2-19 User setting constants 0119 A2-20 User setting constants 011A A2-21 User setting constants 011B A2-22 User setting constants 011C A2-23 User setting constants 011D A2-24 User setting constants 011E A2-25 User setting constants 011F A2-26 User setting constants 0120 A2-27 User setting constants 0121 A2-28 User setting constants 0122 A2-29 User setting constants 0123 A2-30 User setting constants 0124 A2-31 User setting constants 0125 A2-32 User setting constants 0180 b1-01 Reference selection 0181 b1-02 Operation method selection 0182 b1-03 Stopping method selection 0183 b1-04 Prohibition of reverse operation 0184 b1-05 Operation selection for setting E1-09 or less 0185 b1-06 Read sequence input twice 0186 b1-07 Operation selection after operation reference switched 0187 b1-08 PRG mode operation reference selection 0189 b2-01 Zero-speed level (DC injection braking starting frequency) 018A b2-02 DC injection braking current 018B b2-03 DC injection braking time at start 018C b2-04 DC injection braking time at stop 0190 b2-08 Magnetic flux compensation volume 0191 b3-01 Speed search selection 0192 b3-02 Speed search operating current (current detection) 0193 b3-03 Speed search deceleration time (current detection) 0195 b3-05 Speed search wait time 019A b3-10 Speed search detection correction gain 019E b3-14 Rotation direction search selection 01A3 b4-01 Timer function ON-delay time 01A4 b4-02 Timer function OFF-delay time 01A5 b5-01 PID control method selection 01A6 b5-02 Proportional gain (P) 01A7 b5-03 Integral (I) time 01A8 b5-04 Integral (I) limit 01A9 b5-05 Derivative (D) time 01AA b5-06 PID limit 01AB b5-07 PID offset adjustment 01AC b5-08 PID primary delay time constant 01AD b5-09 PID output characteristics selection 01AE b5-10 PID output gain 01AF b5-11 PID reverse output selection 01B0 b5-12 Selection of PID feedback command loss detection 01B1 b5-13 PID feedback command loss detection level 01B2 b5-14 PID feedback command loss detection time 01B3 b5-15 PID sleep function operation level 01B4 b5-16 PID sleep operation delay time 01B5 b5-17 Accel/decel time for PID reference 01B6 b6-01 Dwell frequency at start 01B7 b6-02 Dwell time at start 01B8 b6-03 Dwell frequency at stop 01B9 b6-04 Dwell time at stop 01CA b7-01 Droop control gain 01CB b7-02 Droop control delay time 01DA b9-01 Zero-servo gain 01DB b9-02 Zero-servo completion width 01F2 b3-19 Number of speed search retrials 0200 C1-01 Acceleration time 1 0201 C1-02 Deceleration time 1 0202 C1-03 Acceleration time 2 0203 C1-04 Deceleration time 2 0204 C1-05 Acceleration time 3 0205 C1-06 Deceleration time 3 0206 C1-07 Acceleration time 4 0207 C1-08 Deceleration time 4 0208 C1-09 Emergency stop time 0209 C1-10 Accel/decel time setting unit 020A C1-11 Accel/decel time switching frequency 020B C2-01 S-curve characteristic time at acceleration start 020C C2-02 S-curve characteristic time at acceleration end 020D C2-03 S-curve characteristic time at deceleration start 020E C2-04 S-curve characteristic time at deceleration end 020F C3-01 Slip compensation gain 0210 C3-02 Slip compensation primary delay time 0211 C3-03 Slip compensation limit 0212 C3-04 Slip compensation selection during regeneration 0213 C3-05 Output voltage limit operation selection 0215 C4-01 Torque compensation gain 0216 C4-02 Torque compensation primary delay time constant 0217 C4-03 Forward starting torque 0218 C4-04 Reverse starting torque 0219 C4-05 Starting torque time constant 021B C5-01 ASR proportional (P) gain 1 021C C5-02 ASR integral (I) time 1 021D C5-03 ASR proportional (P) gain 2 021E C5-04 ASR integral (I) time 2 0220 C5-06 ASR primary delay time 0221 C5-07 ASR switching frequency 0222 C5-08 ASR integral (I) limit 0224 C6-02 Carrier frequency selection 0280 d1-01 Frequency reference 1 0281 d1-02 Frequency reference 2 0282 d1-03 Frequency reference 3 0283 d1-04 Frequency reference 4 0284 d1-05 Frequency reference 5 0285 d1-06 Frequency reference 6 0286 d1-07 Frequency reference 7 0287 d1-08 Frequency reference 8 0288 d1-09 Frequency reference 9 028B d1-10 Frequency reference 10 028C d1-11 Frequency reference 11 028D d1-12 Frequency reference 12 028E d1-13 Frequency reference 13 028F d1-14 Frequency reference 14 0290 d1-15 Frequency reference 15 0291 d1-16 Frequency reference 16 0292 d1-17 Jog frequency reference 0289 d2-01 Frequency reference upper limit 028A d2-02 Frequency reference lower limit 0293 d2-03 Master speed reference lower limit 0294 d3-01 Jump frequency 1 0295 d3-02 Jump frequency 2 0296 d3-03 Jump frequency 3 0297 d3-04 Jump frequency width 0298 d4-01 Frequency reference hold function selection 0299 d4-02 + - Speed limits 029A d5-01 Torque control selection 029B d5-02 Torque reference delay time 029C d5-03 Speed limit selection 029D d5-04 Speed limit 029E d5-05 Speed limit bias 029F d5-06 Speed/torque control switching timer 02A0 d6-01 Field weakening level 02A1 d6-02 Field frequency 02A2 d6-03 Field forcing function selection 02A5 d6-06 Field forcing limit 0300 E1-01 Input voltage setting 0302 E1-03 V/f pattern selection 0303 E1-04 Max. output frequency 0304 E1-05 Max. voltage 0305 E1-06 Base frequency 0306 E1-07 Mid. output frequency 0307 E1-08 Mid. output frequency voltage 0308 E1-09 Min. output frequency 0309 E1-10 Min. output frequency voltage 030A E1-11 Mid. output frequency 2 030B E1-12 Mid. output frequency voltage 2 030C E1-13 Base voltage 030E E2-01 Motor rated current 030F E2-02 Motor rated slip 0310 E2-03 Motor noload current 0311 E2-04 Number of motor poles 0312 E2-05 Motor line-to-line resistance 0313 E2-06 Motor leak inductance 0314 E2-07 Motor iron saturation coefficient 1 0315 E2-08 Motor iron saturation coefficient 2 0316 E2-09 Motor mechanical loss 0317 E2-10 Motor iron loss for torque compensation 0318 E2-11 Motor rated output 0328 E2-12 Motor iron saturation coefficient 3 0319 E3-01 Motor 2 control method selection 031A E3-02 Motor 2 max. output frequency (FMAX) 031B E3-03 Motor 2 max. voltage (VMAX) 031C E3-04 Motor 2 max. voltage frequency (FA) 031D E3-05 Motor 2 mid. output frequency 1 (FB) 031E E3-06 Motor 2 mid. output frequency voltage 1 (VC) 031F E3-07 Motor 2 min. output frequency (FMIN) 0320 E3-08 Motor 2 min. output frequency voltage (VMIN) 0321 E4-01 Motor 2 rated current 0322 E4-02 Motor 2 rated slip 0323 E4-03 Motor 2 noload current 0324 E4-04 Motor 2 number of poles (number of poles) 0325 E4-05 Motor 2 line-to-line resistance 0326 E4-06 Motor 2 leak inductance 0327 E4-07 Motor 2 rated capacity 0380 F1-01 PG constant 0381 F1-02 Operation selection at PG open circuit (PGO) 0382 F1-03 Operation selection at overspeed (OS) 0383 F1-04 Operation selection at deviation 0384 F1-05 PG rotation 0385 F1-06 PG division rate 0387 F1-08 Overspeed detection level 0388 F1-09 Overspeed detection delay time 0389 F1-10 Excessive speed deviation detection level 038A F1-11 Excessive speed deviation detection delay time 038D F1-14 PG open-circuit detection time 038F F2-01 Operation selection of analog reference card 0390 F3-01 Digital reference card input selection 0391 F4-01 CH1 output monitor selection 0392 F4-02 CH1 output monitor gain 0393 F4-03 CH2 output monitor selection 0394 F4-04 CH2 output monitor gain 0395 F4-05 CH1 output monitor bias 0396 F4-06 CH2 output monitor bias 0397 F4-07 Analog output signal level for CH1 0398 F4-08 Analog output signal level for CH2 0399 F5-01 CH1 output selection 039A F5-02 CH2 output selection 039B F5-03 CH3 output selection 039C F5-04 CH4 output selection 039D F5-05 CH5 output selection 039E F5-06 CH6 output selection 039F F5-07 CH7 output selection 03A0 F5-08 CH8 output selection 03A1 F5-09 DO-08 output mode selection 03A2 F6-01 Operation selection after communications error 03A3 F6-02 Input level of external fault from Communications Option Board 03A4 F6-03 Stopping method for external fault from Communications Option Board 03A5 F6-04 Trace sampling from Communications Option Board 03A7 F6-06 Torque reference/torque limit selection from optical option 0400 H1-01 Terminal S3 function selection 0401 H1-02 Terminal S4 function selection 0402 H1-03 Terminal S5 function selection 0403 H1-04 Terminal S6 function selection 0404 H1-05 Terminal S7 function selection 0405 H1-06 Terminal S8 function selection 0406 H1-07 Terminal S9 function selection 0407 H1-08 Terminal S10 function selection 0408 H1-09 Terminal S11 function selection 0409 H1-10 Terminal S12 function selection 040B H2-01 Terminal M1-M2 function selection (contact) 040C H2-02 Terminal P1 function selection (open collector) 040D H2-03 Terminal P2 function selection (open collector) 040E H2-04 Terminal P3 function selection (open collector) 040F H2-05 Terminal P4 function selection (open collector) 0410 H3-01 Frequency reference (Voltage) terminal A1 signal level selection 0411 H3-02 Frequency reference (Voltage) terminal A1 input gain 0412 H3-03 Frequency reference (Voltage) terminal A1 input bias 0413 H3-04 Multi-function analog input terminal A3 signal level selection 0414 H3-05 Multi-function analog input terminal A3 function selection 0415 H3-06 Multi-function analog input terminal A3 input gain 0416 H3-07 Multi-function analog input terminal A3 input bias 0417 H3-08 Frequency reference (Current) terminal A2 signal level selection 0418 H3-09 Frequency reference (Current) terminal A2 function selection 0419 H3-10 Frequency reference (Current) terminal A2 input gain 041A H3-11 Frequency reference (Current) terminal A2 input bias 041B H3-12 Analog input filter time constant 041D H4-01 Multi-function analog output1 terminal FM monitor selection 041E H4-02 Multi-function analog output1 terminal FM output gain 041F H4-03 Multi-function analog output1 terminal FM bias 0420 H4-04 Multi-function analog output2 terminal AM monitor 0421 H4-05 Multi-function analog output2 terminal AM gain 0422 H4-06 Multi-function analog output2 terminal AM bias 0423 H4-07 Multi-function analog output1 signal level selection 0424 H4-08 Multi-function analog output2 signal level selection 0425 H5-01 Slave address 0426 H5-02 Communication speed selection 0427 H5-03 Communication parity selection 0428 H5-04 Operation method after communication error 0429 H5-05 Communication error detection selection 042A H5-06 Send wait time 042B H5-07 RTS control ON/OFF 0436 H5-10 MEMOBUS register(0025H) unit selection 0480 L1-01 Motor protection selection 0481 L1-02 Motor protection time constant 0482 L1-03 Alarm operation selection during motor overheating 0483 L1-04 Motor overheating operation selection 0484 L1-05 Motor temperature input filter time constant 0485 L2-01 Momentary power loss detection 0486 L2-02 Momentary power loss ridethru time 0487 L2-03 Min. baseblock time 0488 L2-04 Voltage recovery time 0489 L2-05 Undervoltage detection level 04CD L2-13 Input power supply frequency abnormality detection gain 04D5 L2-21 Input voltage low voltage (AUV) detection level 048F L3-01 Stall prevention selection during accel 0490 L3-02 Stall prevention level during accel 0491 L3-03 Stall prevention limit during accel/decel 0492 L3-04 Stall prevention selection during decel 0493 L3-05 Stall prevention selection during running 0494 L3-06 Stall prevention level during running 04E9 L3-14 Stall prevention level during decel 0499 L4-01 Frequency detection level 049A L4-02 Frequency detection width 049B L4-03 Frequency detection level (+/- one side detection) 049C L4-04 Frequency detection width (+/- one side detection) 049D L4-05 Operation selection when frequency reference is missing 049E L5-01 Abnormal retrying frequency 049F L5-02 Auto restart operation selection 04A1 L6-01 Overtorque/under torque detection operation selection 1 04A2 L6-02 Overtorque/under torque detection level 1 04A3 L6-03 Overtorque/under torque detection time 1 04A4 L6-04 Overtorque/under torque detection operation selection 2 04A5 L6-05 Overtorque/under torque detection level 2 04A6 L6-06 Overtorque/under torque detection time 2 04A7 L7-01 Forward drive torque limit 04A8 L7-02 Reverse drive torque limit 04A9 L7-03 Forward regenerative torque limit 04AA L7-04 Reverse regenerative torque limit 04AC L7-06 Integral time setting for torque limit 04C9 L7-07 Control method selection for torque limit during acceleration and deceleration 04AE L8-02 The previous notice of Matocon overheating (OH) alarm detection level 04AF L8-03 The previous notice of Matocon overheating (OH) alarm operation selection 04B3 L8-07 Output open-phase protection selection 04B5 L8-09 Ground protection selection 04B6 L8-10 Cooling fan control selection 04B7 L8-11 Cooling fan control delay time 04B8 L8-12 Ambient temperature 04BB L8-15 Low-speed OL2 characteristic selection 0580 N1-01 Hunting-prevention function selection 0581 N1-02 Hunting-prevention gain 0582 N1-03 Hunting-prevention constant 0584 N2-01 Speed feedback detection control (AFR) gain 0585 N2-02 Speed feedback detection control (AFR) time constant 0586 N2-03 Speed feedback detection control (AFR) time constant 2 05B0 N5-01 Feed forward control selection 05B1 N5-02 Motor acceleration time 05B2 N5-03 Feed forward proportional gain 0500 o1-01 Drive mode display item selection 0501 o1-02 Monitor selection after power up 0502 o1-03 Frequency units of reference setting and monitor 0503 o1-04 Setting unit for frequency constants related to V/f characteristics 0504 o1-05 LCD brightness adjustment 0505 o2-01 LOCAL/REMOTE key selection 0506 o2-02 STOP key selection 0507 o2-03 User constant initial value 0508 o2-04 Motor capacity selection 0509 o2-05 Frequency reference setting method selection 050A o2-06 Operation selection when digital operator is disconnected 050B o2-07 Cumulative operation time setting 050C o2-08 Cumulative operation time selection 050D o2-09 Initialization mode 050E o2-10 Setting at Fan operating time 0510 o2-12 Fault trace/fault history clear function 0512 o2-14 KWH monitor initialization selection 0515 o3-01 Copy function selection 0516 o3-02 Read permitted selection 0700 T1-00 Motor 1/2 selection 0701 T1-01 Autotuning mode selection 0702 T1-02 Motor output power 0703 T1-03 Motor rated voltage 0704 T1-04 Motor rated current 0705 T1-05 Motor base frequency 0706 T1-06 Number of motor poles 0707 T1-07 Motor base speed 0708 T1-08 Number of PG pulses when turning 0709 T1-09 Motor noload current 070A T1-10 Motor rated slipping 0040 U1-01 Frequency reference 0041 U1-02 Output frequency 0042 U1-03 Output current 0043 U1-04 Control mode 0044 U1-05 Motor speed 0045 U1-06 Output voltage 0046 U1-07 Control circuit voltage 0047 U1-08 Output power 0048 U1-09 Torque reference 0049.0 U1-10 1:FWD command(S1) is ON (Input terminal status) 0049.1 U1-10 1:REV command(S2) is ON (Input terminal status) 0049.2 U1-10 1:Multi input 1(S3) is ON (Input terminal status) 0049.3 U1-10 1:Multi input 2(S4) is ON (Input terminal status) 0049.4 U1-10 1:Multi input 3(S5) is ON (Input terminal status) 0049.5 U1-10 1:Multi input 4(S6) is ON (Input terminal status) 0049.6 U1-10 1:Multi input 5(S7) is ON (Input terminal status) 0049.7 U1-10 1:Multi input 6(S8) is ON (Input terminal status) 004A.0 U1-11 1:Multi-function contact output(M1-M2) is ON (Output terminal status) 004A.1 U1-11 1:Multi-function contact output 1(Terminal P1) is ON (Output terminal status) 004A.2 U1-11 1:Multi-function contact output 2(Terminal P2) is ON (Output terminal status) 004A.3 U1-11 1:Multi-function contact output 3(Terminal P3) is ON (Output terminal status) 004A.4 U1-11 1:Multi-function contact output 4(Terminal P4) is ON (Output terminal status) 004A.7 U1-11 1:Error output(MA/MB-MC) (Output terminal status) 004B.0 U1-12 1:Run (Operation status) 004B.1 U1-12 1:Zero speed (Operation status) 004B.2 U1-12 1:Reverse (Operation status) 004B.3 U1-12 1:Reset signal input (Operation status) 004B.4 U1-12 1:Speed agree (Operation status) 004B.5 U1-12 1:Inverter ready (Operation status) 004B.6 U1-12 1:Minor fault (Operation status) 004B.7 U1-12 1:Major fault (Operation status) 004C U1-13 Cumulative operation time 004D U1-14 Software No. (flash memory) 004E U1-15 Frequency reference (Voltage) Terminal A1 input voltage 004F U1-16 Multi-function analog Terminal A2 input voltage 0050 U1-17 Multi-function analog Terminal A3 input voltage 0051 U1-18 Motor secondary current (Iq) 0052 U1-19 Motor exciting current (Id) 0053 U1-20 Output frequency after soft-start 0054 U1-21 ASR input 0055 U1-22 ASR output 0057 U1-24 PID feedback value 0058 U1-25 D1-16H2 input state 0059 U1-26 Output voltage reference (Vq) 005A U1-27 Output voltage reference (Vd) 005B U1-28 Software No. (CPU) 005C U1-29 Output power lower 4 digits 005D U1-30 Output power upper 5 digits 005F U1-32 ACR output of q axis 0060 U1-33 ACR output of d axis 0061 U1-34 OPE fault constant 0062 U1-35 Zero-servo movement pulses 0063 U1-36 PID input volume 0064 U1-37 PID output volume 0065 U1-38 PID target value 0066.0 U1-39 1:CRC error (MEMOBUS communications error code) 0066.1 U1-39 1:Data length error (MEMOBUS communications error code) 0066.3 U1-39 1:Parity error (MEMOBUS communications error code) 0066.4 U1-39 1:Overrun error (MEMOBUS communications error code) 0066.5 U1-39 1:Framing error (MEMOBUS communications error code) 0066.6 U1-39 1:Timeout (MEMOBUS communications error code) 0067 U1-40 Cooling fan operating time 006B U1-44 Feedback control (ASR) output (without filter) 006C U1-45 Feed forward control output 0075 U1-54 Input power voltage 0076 U1-55 Input power Frequency 0077.0 U1-56 AUV released 0: Not completed 1: Completed 0077.1 U1-56 Input Open-phase released 0: Not completed 1: Completed 0077.2 U1-56 Rated frequency detection 0: Not completed 1: Completed 0077.3 U1-56 Phase order detection completed 0: Not completed 1: Completed 0077.4 U1-56 Power detection completed 0: Not completed 1: Completion 0077.5 U1-56 Power frequency fault1 0: Normal 1: Abnormal 0077.6 U1-56 Power frequency fault2 0: Normal 1: Abnormal 0077.7 U1-56 Input Open-phase detection 0: Normal 1: Abnormal 0080 U2-01 Current fault 0081 U2-02 Previous fault 0082 U2-03 Reference frequency at fault 0083 U2-04 Output frequency at fault 0084 U2-05 Output current at fault 0085 U2-06 Motor speed at fault 0086 U2-07 Output voltage reference at fault 0087 U2-08 Control circuit voltage at fault 0088 U2-09 Output power at fault 0089 U2-10 Torque reference at fault 008A U2-11 Input terminal status at fault 008B U2-12 Output terminal status at fault 008C U2-13 Operation status at fault 008D U2-14 Cumulative operation time at fault 0090 U3-01 Most recent fault 0091 U3-02 Second most recent fault 0092 U3-03 Third most recent fault 0093 U3-04 Fourth most recent fault 0094 U3-05 Cumulative operation time at fault 0095 U3-06 Accumulated time of second fault 0096 U3-07 Accumulated time of third fault 0097 U3-08 Accumulated time of fourth fault [SigDataEnd]-B