Name=PLC1
UT2000
MaxSigCnt=0
DataFormat=Dec

[D-SigData]
D0001	STATUS
D0002	1.ERROR [CH1]
D0003	2.ERROR [CH2]
D0004	3.ERROR [CH3]
D0005	4.ERROR [CH4]
D0006	1.PV (Process value) [CH1]
D0007	2.PV (Process value) [CH2]
D0008	3.PV (Process value) [CH3]
D0009	4.PV (Process value) [CH4]
D0010	1.CSP (Current target setpoint) [CH1]
D0011	2.CSP (Current target setpoint) [CH2]
D0012	3.CSP (Current target setpoint) [CH3]
D0013	4.CSP (Current target setpoint) [CH4]
D0014	1.OUT (Output value) [CH1]
D0015	2.OUT (Output value) [CH2]
D0016	3.OUT (Output value) [CH3]
D0017	4.OUT (Output value) [CH4]
D0018	1.MOD (Mode status) [CH1]
D0019	2.MOD (Mode status) [CH2]
D0020	3.MOD (Mode status) [CH3]
D0021	4.MOD (Mode status) [CH4]
D0022	1.DEV (Deviation) [CH1]
D0023	2.DEV (Deviation) [CH2]
D0024	3.DEV (Deviation) [CH3]
D0025	4.DEV (Deviation) [CH4]
D0026	1.SPNO (Set group number) [CH1]
D0027	2.SPNO (Set group number) [CH2]
D0028	3.SPNO (Set group number) [CH3]
D0029	4.SPNO (Set group number) [CH4]
D0030	1.HC (Heater current value) [CH1]
D0031	2.HC (Heater current value) [CH2]
D0032	3.HC (Heater current value) [CH3]
D0033	4.HC (Heater current value) [CH4]
D0090	(REG SL)
D0091	(100%)
D0092	(75%)
D0093	(50%)
D0094	(25%)
D0095	(0%)
D0110	1.SP (Target setpoint) [1CH Operation data]
D0111	1.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0112	1.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0113	1.PB (Proportional band) [1CH Operation data]
D0114	1.TI (Integral time) [1CH Operation data]
D0115	1.TD (Derivative time) [1CH Operation data]
D0116	1.MR (Manual reset) [1CH Operation data]
D0117	1.HYS (Hysteresis) [1CH Operation data]
D0118	1.DR (Direct/reverse action switching) [1CH Operation data]
D0120	2.SP (Target setpoint) [1CH Operation data]
D0121	2.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0122	2.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0123	2.PB (Proportional band) [1CH Operation data]
D0124	2.TI (Integral time) [1CH Operation data]
D0125	2.TD (Derivative time) [1CH Operation data]
D0126	2.MR (Manual reset) [1CH Operation data]
D0127	2.HYS (Hysteresis) [1CH Operation data]
D0128	2.DR (Direct/reverse action switching) [1CH Operation data]
D0130	3.SP (Target setpoint) [1CH Operation data]
D0131	3.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0132	3.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0133	3.PB (Proportional band) [1CH Operation data]
D0134	3.TI (Integral time) [1CH Operation data]
D0135	3.TD (Derivative time) [1CH Operation data]
D0136	3.MR (Manual reset) [1CH Operation data]
D0137	3.HYS (Hysteresis) [1CH Operation data]
D0138	3.DR (Direct/reverse action switching) [1CH Operation data]
D0140	4.SP (Target setpoint) [1CH Operation data]
D0141	4.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0142	4.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0143	4.PB (Proportional band) [1CH Operation data]
D0144	4.TI (Integral time) [1CH Operation data]
D0145	4.TD (Derivative time) [1CH Operation data]
D0146	4.MR (Manual reset) [1CH Operation data]
D0147	4.HYS (Hysteresis) [1CH Operation data]
D0148	4.DR (Direct/reverse action switching) [1CH Operation data]
D0150	5.SP (Target setpoint) [1CH Operation data]
D0151	5.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0152	5.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0153	5.PB (Proportional band) [1CH Operation data]
D0154	5.TI (Integral time) [1CH Operation data]
D0155	5.TD (Derivative time) [1CH Operation data]
D0156	5.MR (Manual reset) [1CH Operation data]
D0157	5.HYS (Hysteresis) [1CH Operation data]
D0158	5.DR (Direct/reverse action switching) [1CH Operation data]
D0160	6.SP (Target setpoint) [1CH Operation data]
D0161	6.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0162	6.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0163	6.PB (Proportional band) [1CH Operation data]
D0164	6.TI (Integral time) [1CH Operation data]
D0165	6.TD (Derivative time) [1CH Operation data]
D0166	6.MR (Manual reset) [1CH Operation data]
D0167	6.HYS (Hysteresis) [1CH Operation data]
D0168	6.DR (Direct/reverse action switching) [1CH Operation data]
D0170	7.SP (Target setpoint) [1CH Operation data]
D0171	7.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0172	7.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0173	7.PB (Proportional band) [1CH Operation data]
D0174	7.TI (Integral time) [1CH Operation data]
D0175	7.TD (Derivative time) [1CH Operation data]
D0176	7.MR (Manual reset) [1CH Operation data]
D0177	7.HYS (Hysteresis) [1CH Operation data]
D0178	7.DR (Direct/reverse action switching) [1CH Operation data]
D0180	8.SP (Target setpoint) [1CH Operation data]
D0181	8.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0182	8.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0183	8.PB (Proportional band) [1CH Operation data]
D0184	8.TI (Integral time) [1CH Operation data]
D0185	8.TD (Derivative time) [1CH Operation data]
D0186	8.MR (Manual reset) [1CH Operation data]
D0187	8.HYS (Hysteresis) [1CH Operation data]
D0188	8.DR (Direct/reverse action switching) [1CH Operation data]
D0210	1.SP (Target setpoint) [2CH Operation data]
D0211	1.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0212	1.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0213	1.PB (Proportional band) [2CH Operation data]
D0214	1.TI (Integral time) [2CH Operation data]
D0215	1.TD (Derivative time) [2CH Operation data]
D0216	1.MR (Manual reset) [2CH Operation data]
D0217	1.HYS (Hysteresis) [2CH Operation data]
D0218	1.DR (Direct/reverse action switching) [2CH Operation data]
D0220	2.SP (Target setpoint) [2CH Operation data]
D0221	2.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0222	2.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0223	2.PB (Proportional band) [2CH Operation data]
D0224	2.TI (Integral time) [2CH Operation data]
D0225	2.TD (Derivative time) [2CH Operation data]
D0226	2.MR (Manual reset) [2CH Operation data]
D0227	2.HYS (Hysteresis) [2CH Operation data]
D0228	2.DR (Direct/reverse action switching) [2CH Operation data]
D0230	3.SP (Target setpoint) [2CH Operation data]
D0231	3.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0232	3.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0233	3.PB (Proportional band) [2CH Operation data]
D0234	3.TI (Integral time) [2CH Operation data]
D0235	3.TD (Derivative time) [2CH Operation data]
D0236	3.MR (Manual reset) [2CH Operation data]
D0237	3.HYS (Hysteresis) [2CH Operation data]
D0238	3.DR (Direct/reverse action switching) [2CH Operation data]
D0240	4.SP (Target setpoint) [2CH Operation data]
D0241	4.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0242	4.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0243	4.PB (Proportional band) [2CH Operation data]
D0244	4.TI (Integral time) [2CH Operation data]
D0245	4.TD (Derivative time) [2CH Operation data]
D0246	4.MR (Manual reset) [2CH Operation data]
D0247	4.HYS (Hysteresis) [2CH Operation data]
D0248	4.DR (Direct/reverse action switching) [2CH Operation data]
D0250	5.SP (Target setpoint) [2CH Operation data]
D0251	5.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0252	5.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0253	5.PB (Proportional band) [2CH Operation data]
D0254	5.TI (Integral time) [2CH Operation data]
D0255	5.TD (Derivative time) [2CH Operation data]
D0256	5.MR (Manual reset) [2CH Operation data]
D0257	5.HYS (Hysteresis) [2CH Operation data]
D0258	5.DR (Direct/reverse action switching) [2CH Operation data]
D0260	6.SP (Target setpoint) [2CH Operation data]
D0261	6.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0262	6.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0263	6.PB (Proportional band) [2CH Operation data]
D0264	6.TI (Integral time) [2CH Operation data]
D0265	6.TD (Derivative time) [2CH Operation data]
D0266	6.MR (Manual reset) [2CH Operation data]
D0267	6.HYS (Hysteresis) [2CH Operation data]
D0268	6.DR (Direct/reverse action switching) [2CH Operation data]
D0270	7.SP (Target setpoint) [2CH Operation data]
D0271	7.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0272	7.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0273	7.PB (Proportional band) [2CH Operation data]
D0274	7.TI (Integral time) [2CH Operation data]
D0275	7.TD (Derivative time) [2CH Operation data]
D0276	7.MR (Manual reset) [2CH Operation data]
D0277	7.HYS (Hysteresis) [2CH Operation data]
D0278	7.DR (Direct/reverse action switching) [2CH Operation data]
D0280	8.SP (Target setpoint) [2CH Operation data]
D0281	8.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0282	8.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0283	8.PB (Proportional band) [2CH Operation data]
D0284	8.TI (Integral time) [2CH Operation data]
D0285	8.TD (Derivative time) [2CH Operation data]
D0286	8.MR (Manual reset) [2CH Operation data]
D0287	8.HYS (Hysteresis) [2CH Operation data]
D0288	8.DR (Direct/reverse action switching) [2CH Operation data]
D0310	1.SP (Target setpoint) [3CH Operation data]
D0311	1.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0312	1.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0313	1.PB (Proportional band) [3CH Operation data]
D0314	1.TI (Integral time) [3CH Operation data]
D0315	1.TD (Derivative time) [3CH Operation data]
D0316	1.MR (Manual reset) [3CH Operation data]
D0317	1.HYS (Hysteresis) [3CH Operation data]
D0318	1.DR (Direct/reverse action switching) [3CH Operation data]
D0320	2.SP (Target setpoint) [3CH Operation data]
D0321	2.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0322	2.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0323	2.PB (Proportional band) [3CH Operation data]
D0324	2.TI (Integral time) [3CH Operation data]
D0325	2.TD (Derivative time) [3CH Operation data]
D0326	2.MR (Manual reset) [3CH Operation data]
D0327	2.HYS (Hysteresis) [3CH Operation data]
D0328	2.DR (Direct/reverse action switching) [3CH Operation data]
D0330	3.SP (Target setpoint) [3CH Operation data]
D0331	3.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0332	3.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0333	3.PB (Proportional band) [3CH Operation data]
D0334	3.TI (Integral time) [3CH Operation data]
D0335	3.TD (Derivative time) [3CH Operation data]
D0336	3.MR (Manual reset) [3CH Operation data]
D0337	3.HYS (Hysteresis) [3CH Operation data]
D0338	3.DR (Direct/reverse action switching) [3CH Operation data]
D0340	4.SP (Target setpoint) [3CH Operation data]
D0341	4.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0342	4.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0343	4.PB (Proportional band) [3CH Operation data]
D0344	4.TI (Integral time) [3CH Operation data]
D0345	4.TD (Derivative time) [3CH Operation data]
D0346	4.MR (Manual reset) [3CH Operation data]
D0347	4.HYS (Hysteresis) [3CH Operation data]
D0348	4.DR (Direct/reverse action switching) [3CH Operation data]
D0350	5.SP (Target setpoint) [3CH Operation data]
D0351	5.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0352	5.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0353	5.PB (Proportional band) [3CH Operation data]
D0354	5.TI (Integral time) [3CH Operation data]
D0355	5.TD (Derivative time) [3CH Operation data]
D0356	5.MR (Manual reset) [3CH Operation data]
D0357	5.HYS (Hysteresis) [3CH Operation data]
D0358	5.DR (Direct/reverse action switching) [3CH Operation data]
D0360	6.SP (Target setpoint) [3CH Operation data]
D0361	6.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0362	6.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0363	6.PB (Proportional band) [3CH Operation data]
D0364	6.TI (Integral time) [3CH Operation data]
D0365	6.TD (Derivative time) [3CH Operation data]
D0366	6.MR (Manual reset) [3CH Operation data]
D0367	6.HYS (Hysteresis) [3CH Operation data]
D0368	6.DR (Direct/reverse action switching) [3CH Operation data]
D0370	7.SP (Target setpoint) [3CH Operation data]
D0371	7.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0372	7.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0373	7.PB (Proportional band) [3CH Operation data]
D0374	7.TI (Integral time) [3CH Operation data]
D0375	7.TD (Derivative time) [3CH Operation data]
D0376	7.MR (Manual reset) [3CH Operation data]
D0377	7.HYS (Hysteresis) [3CH Operation data]
D0378	7.DR (Direct/reverse action switching) [3CH Operation data]
D0380	8.SP (Target setpoint) [3CH Operation data]
D0381	8.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0382	8.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0383	8.PB (Proportional band) [3CH Operation data]
D0384	8.TI (Integral time) [3CH Operation data]
D0385	8.TD (Derivative time) [3CH Operation data]
D0386	8.MR (Manual reset) [3CH Operation data]
D0387	8.HYS (Hysteresis) [3CH Operation data]
D0388	8.DR (Direct/reverse action switching) [3CH Operation data]
D0410	1.SP (Target setpoint) [4CH Operation data]
D0411	1.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0412	1.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0413	1.PB (Proportional band) [4CH Operation data]
D0414	1.TI (Integral time) [4CH Operation data]
D0415	1.TD (Derivative time) [4CH Operation data]
D0416	1.MR (Manual reset) [4CH Operation data]
D0417	1.HYS (Hysteresis) [4CH Operation data]
D0418	1.DR (Direct/reverse action switching) [4CH Operation data]
D0420	2.SP (Target setpoint) [4CH Operation data]
D0421	2.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0422	2.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0423	2.PB (Proportional band) [4CH Operation data]
D0424	2.TI (Integral time) [4CH Operation data]
D0425	2.TD (Derivative time) [4CH Operation data]
D0426	2.MR (Manual reset) [4CH Operation data]
D0427	2.HYS (Hysteresis) [4CH Operation data]
D0428	2.DR (Direct/reverse action switching) [4CH Operation data]
D0430	3.SP (Target setpoint) [4CH Operation data]
D0431	3.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0432	3.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0433	3.PB (Proportional band) [4CH Operation data]
D0434	3.TI (Integral time) [4CH Operation data]
D0435	3.TD (Derivative time) [4CH Operation data]
D0436	3.MR (Manual reset) [4CH Operation data]
D0437	3.HYS (Hysteresis) [4CH Operation data]
D0438	3.DR (Direct/reverse action switching) [4CH Operation data]
D0440	4.SP (Target setpoint) [4CH Operation data]
D0441	4.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0442	4.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0443	4.PB (Proportional band) [4CH Operation data]
D0444	4.TI (Integral time) [4CH Operation data]
D0445	4.TD (Derivative time) [4CH Operation data]
D0446	4.MR (Manual reset) [4CH Operation data]
D0447	4.HYS (Hysteresis) [4CH Operation data]
D0448	4.DR (Direct/reverse action switching) [4CH Operation data]
D0450	5.SP (Target setpoint) [4CH Operation data]
D0451	5.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0452	5.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0453	5.PB (Proportional band) [4CH Operation data]
D0454	5.TI (Integral time) [4CH Operation data]
D0455	5.TD (Derivative time) [4CH Operation data]
D0456	5.MR (Manual reset) [4CH Operation data]
D0457	5.HYS (Hysteresis) [4CH Operation data]
D0458	5.DR (Direct/reverse action switching) [4CH Operation data]
D0460	6.SP (Target setpoint) [4CH Operation data]
D0461	6.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0462	6.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0463	6.PB (Proportional band) [4CH Operation data]
D0464	6.TI (Integral time) [4CH Operation data]
D0465	6.TD (Derivative time) [4CH Operation data]
D0466	6.MR (Manual reset) [4CH Operation data]
D0467	6.HYS (Hysteresis) [4CH Operation data]
D0468	6.DR (Direct/reverse action switching) [4CH Operation data]
D0470	7.SP (Target setpoint) [4CH Operation data]
D0471	7.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0472	7.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0473	7.PB (Proportional band) [4CH Operation data]
D0474	7.TI (Integral time) [4CH Operation data]
D0475	7.TD (Derivative time) [4CH Operation data]
D0476	7.MR (Manual reset) [4CH Operation data]
D0477	7.HYS (Hysteresis) [4CH Operation data]
D0478	7.DR (Direct/reverse action switching) [4CH Operation data]
D0480	8.SP (Target setpoint) [4CH Operation data]
D0481	8.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0482	8.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0483	8.PB (Proportional band) [4CH Operation data]
D0484	8.TI (Integral time) [4CH Operation data]
D0485	8.TD (Derivative time) [4CH Operation data]
D0486	8.MR (Manual reset) [4CH Operation data]
D0487	8.HYS (Hysteresis) [4CH Operation data]
D0488	8.DR (Direct/reverse action switching) [4CH Operation data]
D0510	1.SP (Target setpoint) [All CH1~CH4 setting]
D0511	1.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0512	1.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0513	1.PB (Proportional band) [All CH1~CH4 setting]
D0514	1.TI (Integral time) [All CH1~CH4 setting]
D0515	1.TD (Derivative time) [All CH1~CH4 setting]
D0516	1.MR (Manual reset) [All CH1~CH4 setting]
D0517	1.HYS (Hysteresis) [All CH1~CH4 setting]
D0518	1.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0520	2.SP (Target setpoint) [All CH1~CH4 setting]
D0521	2.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0522	2.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0523	2.PB (Proportional band) [All CH1~CH4 setting]
D0524	2.TI (Integral time) [All CH1~CH4 setting]
D0525	2.TD (Derivative time) [All CH1~CH4 setting]
D0526	2.MR (Manual reset) [All CH1~CH4 setting]
D0527	2.HYS (Hysteresis) [All CH1~CH4 setting]
D0528	2.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0530	3.SP (Target setpoint) [All CH1~CH4 setting]
D0531	3.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0532	3.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0533	3.PB (Proportional band) [All CH1~CH4 setting]
D0534	3.TI (Integral time) [All CH1~CH4 setting]
D0535	3.TD (Derivative time) [All CH1~CH4 setting]
D0536	3.MR (Manual reset) [All CH1~CH4 setting]
D0537	3.HYS (Hysteresis) [All CH1~CH4 setting]
D0538	3.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0540	4.SP (Target setpoint) [All CH1~CH4 setting]
D0541	4.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0542	4.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0543	4.PB (Proportional band) [All CH1~CH4 setting]
D0544	4.TI (Integral time) [All CH1~CH4 setting]
D0545	4.TD (Derivative time) [All CH1~CH4 setting]
D0546	4.MR (Manual reset) [All CH1~CH4 setting]
D0547	4.HYS (Hysteresis) [All CH1~CH4 setting]
D0548	4.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0550	5.SP (Target setpoint) [All CH1~CH4 setting]
D0551	5.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0552	5.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0553	5.PB (Proportional band) [All CH1~CH4 setting]
D0554	5.TI (Integral time) [All CH1~CH4 setting]
D0555	5.TD (Derivative time) [All CH1~CH4 setting]
D0556	5.MR (Manual reset) [All CH1~CH4 setting]
D0557	5.HYS (Hysteresis) [All CH1~CH4 setting]
D0558	5.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0560	6.SP (Target setpoint) [All CH1~CH4 setting]
D0561	6.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0562	6.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0563	6.PB (Proportional band) [All CH1~CH4 setting]
D0564	6.TI (Integral time) [All CH1~CH4 setting]
D0565	6.TD (Derivative time) [All CH1~CH4 setting]
D0566	6.MR (Manual reset) [All CH1~CH4 setting]
D0567	6.HYS (Hysteresis) [All CH1~CH4 setting]
D0568	6.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0570	7.SP (Target setpoint) [All CH1~CH4 setting]
D0571	7.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0572	7.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0573	7.PB (Proportional band) [All CH1~CH4 setting]
D0574	7.TI (Integral time) [All CH1~CH4 setting]
D0575	7.TD (Derivative time) [All CH1~CH4 setting]
D0576	7.MR (Manual reset) [All CH1~CH4 setting]
D0577	7.HYS (Hysteresis) [All CH1~CH4 setting]
D0578	7.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0580	8.SP (Target setpoint) [All CH1~CH4 setting]
D0581	8.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0582	8.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0583	8.PB (Proportional band) [All CH1~CH4 setting]
D0584	8.TI (Integral time) [All CH1~CH4 setting]
D0585	8.TD (Derivative time) [All CH1~CH4 setting]
D0586	8.MR (Manual reset) [All CH1~CH4 setting]
D0587	8.HYS (Hysteresis) [All CH1~CH4 setting]
D0588	8.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0600	SC (SUPER function selection) [1CH Setup data]
D0601	AT (Auto-tuning selection) [1CH Setup data]
D0602	SP.UP (Setpoint ramp-up rate setting) [1CH Setup data]
D0603	SP.DN (Setpoint ramp-down rate setting) [1CH Setup data]
D0604	SP.R (Ramp-rate time unit setting) [1CH Setup data]
D0605	FL (Filter) [1CH Setup data]
D0606	BS (Input compensation bias) [1CH Setup data]
D0607	A/M (AUTO/MAN modes) [1CH Setup data]
D0608	R/S (STOP/RUN modes) [1CH Setup data]
D0609	MANOUT (Manual output value) [1CH Setup data]
D0610	PROUT (Preset output value) [1CH Setup data]
D0611	SPNO (Group SP number) [1CH Setup data]
D0612	HB (Heater current measurement) [1CH Setup data]
D0613	AL1 (Alarm-1 type) [1CH Setup data]
D0614	AL2 (Alarm-2 type) [1CH Setup data]
D0615	HY1 (Alarm-1 hysteresis) [1CH Setup data]
D0616	HY2 (Alarm-2 hysteresis) [1CH Setup data]
D0617	CT (Cycle time) [1CH Setup data]
D0618	OH (Upper limit of output) [1CH Setup data]
D0619	OL (Lower limit of output) [1CH Setup data]
D0620	RST (Restart mode) [1CH Setup data]
D0621	ORBND (ON/OFF rate detection width) [1CH Setup data]
D0622	ORHI (ON/OFF rate upper limit) [1CH Setup data]
D0623	ORLO (ON/OFF rate lower limit) [1CH Setup data]
D0624	USE (use/unuse) [1CH Setup data]
D0625	A3 (Alarm-3 setpoint) [1CH Setup data]
D0626	AL3 (Alarm-3 type) [1CH Setup data]
D0627	HY3 (Alarm-3 hysteresis) [1CH Setup data]
D0650	PD (Decimal point position) [1CH Setup data]
D0651	RH (Instrument range upper limit) [1CH Setup data]
D0652	RL (Instrument range lower limit) [1CH Setup data]
D0653	ARSL (ARM action mode) [1CH Setup data]
D0654	MD (Channel action mode) [1CH Setup data]
D0700	SC (SUPER function selection) [2CH Setup data]
D0701	AT (Auto-tuning selection) [2CH Setup data]
D0702	SP.UP (Setpoint ramp-up rate setting) [2CH Setup data]
D0703	SP.DN (Setpoint ramp-down rate setting) [2CH Setup data]
D0704	SP.R (Rate time unit) [2CH Setup data]
D0705	FL (Filter) [2CH Setup data]
D0706	BS (Input compensation bias) [2CH Setup data]
D0707	A/M (AUTO/MAN modes) [2CH Setup data]
D0708	R/S (STOP/RUN modes) [2CH Setup data]
D0709	MANOUT (ManualOutput value) [2CH Setup data]
D0710	PROUT (PresetOutput value) [2CH Setup data]
D0711	SPNO (Group SP number) [2CH Setup data]
D0712	HB (Heater current measurement) [2CH Setup data]
D0713	AL1 (Alarm-1 type) [2CH Setup data]
D0714	AL2 (Alarm-2 type) [2CH Setup data]
D0715	HY1 (Alarm-1 hysteresis) [2CH Setup data]
D0716	HY2 (Alarm-2 hysteresis) [2CH Setup data]
D0717	CT (Cycle time) [2CH Setup data]
D0718	OH (Upper limit of output) [2CH Setup data]
D0719	OL (Lower limit of output) [2CH Setup data]
D0720	RST (Restart mode) [2CH Setup data]
D0721	ORBND (ON/OFF rate detection width) [2CH Setup data]
D0722	ORHI (ON/OFF rate upper limit) [2CH Setup data]
D0723	ORLO (ON/OFF rate lower limit) [2CH Setup data]
D0724	USE (use/unuse) [2CH Setup data]
D0725	A3 (Alarm-3 setpoint) [2CH Setup data]
D0726	AL3 (Alarm-3 type) [2CH Setup data]
D0727	HY3 (Alarm-3 hysteresis) [2CH Setup data]
D0750	PD (Decimal point position) [2CH Setup data]
D0751	RH (Instrument range upper limit) [2CH Setup data]
D0752	RL (Instrument range lower limit) [2CH Setup data]
D0753	ARSL (ARM action mode) [2CH Setup data]
D0754	MD (Channel action mode) [2CH Setup data]
D0800	SC (SUPER function selection) [3CH Setup data]
D0801	AT (Auto-tuning selection) [3CH Setup data]
D0802	SP.UP (Setpoint ramp-up rate setting) [3CH Setup data]
D0803	SP.DN (Setpoint ramp-down rate setting) [3CH Setup data]
D0804	SP.R (Rate time unit) [3CH Setup data]
D0805	FL (Filter) [3CH Setup data]
D0806	BS (Input compensation bias) [3CH Setup data]
D0807	A/M (AUTO/MAN modes) [3CH Setup data]
D0808	R/S (STOP/RUN modes) [3CH Setup data]
D0809	MANOUT (ManualOutput value) [3CH Setup data]
D0810	PROUT (PresetOutput value) [3CH Setup data]
D0811	SPNO (Group SP number) [3CH Setup data]
D0812	HB (Heater current measurement) [3CH Setup data]
D0813	AL1 (Alarm-1 type) [3CH Setup data]
D0814	AL2 (Alarm-2 type) [3CH Setup data]
D0815	HY1 (Alarm-1 hysteresis) [3CH Setup data]
D0816	HY2 (Alarm-2 hysteresis) [3CH Setup data]
D0817	CT (Cycle time) [3CH Setup data]
D0818	OH (Upper limit of output) [3CH Setup data]
D0819	OL (Lower limit of output) [3CH Setup data]
D0820	RST (Restart mode) [3CH Setup data]
D0821	ORBND (ON/OFF rate detection width) [3CH Setup data]
D0822	ORHI (ON/OFF rate upper limit) [3CH Setup data]
D0823	ORLO (ON/OFF rate lower limit) [3CH Setup data]
D0824	USE (use/unuse) [3CH Setup data]
D0825	A3 (Alarm-3 setpoint) [3CH Setup data]
D0826	AL3 (Alarm-3 type) [3CH Setup data]
D0827	HY3 (Alarm-3 hysteresis) [3CH Setup data]
D0850	PD (Decimal point position) [3CH Setup data]
D0851	RH (Instrument range upper limit) [3CH Setup data]
D0852	RL (Instrument range lower limit) [3CH Setup data]
D0853	ARSL (ARM action mode) [3CH Setup data]
D0854	MD (Channel action mode) [3CH Setup data]
D0900	SC (SUPER function selection) [4CH Setup data]
D0901	AT (Auto-tuning selection) [4CH Setup data]
D0902	SP.UP (Setpoint ramp-up rate setting) [4CH Setup data]
D0903	SP.DN (Setpoint ramp-down rate setting) [4CH Setup data]
D0904	SP.R (Rate time unit) [4CH Setup data]
D0905	FL (Filter) [4CH Setup data]
D0906	BS (Input compensation bias) [4CH Setup data]
D0907	A/M (AUTO/MAN modes) [4CH Setup data]
D0908	R/S (STOP/RUN modes) [4CH Setup data]
D0909	MANOUT (Manual output value) [4CH Setup data]
D0910	PROUT (Preset output value) [4CH Setup data]
D0911	SPNO (Group SP number) [4CH Setup data]
D0912	HB (Heater current measurement) [4CH Setup data]
D0913	AL1 (Alarm-1 type) [4CH Setup data]
D0914	AL2 (Alarm-2 type) [4CH Setup data]
D0915	HY1 (Alarm-1 hysteresis) [4CH Setup data]
D0916	HY2 (Alarm-2 hysteresis) [4CH Setup data]
D0917	CT (Cycle time) [4CH Setup data]
D0918	OH (Upper limit of output) [4CH Setup data]
D0919	OL (Lower limit of output) [4CH Setup data]
D0920	RST (Restart mode) [4CH Setup data]
D0921	ORBND (ON/OFF rate detection width) [4CH Setup data]
D0922	ORHI (ON/OFF rate upper limit) [4CH Setup data]
D0923	ORLO (ON/OFF rate lower limit) [4CH Setup data]
D0924	USE (use/unuse) [4CH Setup data]
D0925	A3 (Alarm-3 setpoint) [4CH Setup data]
D0926	AL3 (Alarm-3 type) [4CH Setup data]
D0927	HY3 (Alarm-3 hysteresis) [4CH Setup data]
D0950	PD (Decimal point position) [4CH Setup data]
D0951	RH (Instrument range upper limit) [4CH Setup data]
D0952	RL (Instrument range lower limit) [4CH Setup data]
D0953	ARSL (ARM action mode) [4CH Setup data]
D0954	MD (Channel action mode) [4CH Setup data]
D0955	STEUP (Setup mode) [All CH Setup data]
D0956	IN (Input type) [All CH Setup data]
D1000	SC (SUPER function selection) [All CH1~CH4 setting]
D1001	AT (Auto-tuning selection) [All CH1~CH4 setting]
D1002	SP.UP (Setpoint ramp-up rate setting) [All CH1~CH4 setting]
D1003	SP.DN (Setpoint ramp-down rate setting) [All CH1~CH4 setting]
D1004	SP.R (Rate time unit) [All CH1~CH4 setting]
D1005	FL (Filter) [All CH1~CH4 setting]
D1006	BS (Input compensation bias) [All CH1~CH4 setting]
D1007	A/M (AUTO/MAN modes) [All CH1~CH4 setting]
D1008	R/S (STOP/RUN modes) [All CH1~CH4 setting]
D1009	MANOUT (ManualOutput value) [All CH1~CH4 setting]
D1010	PROUT (PresetOutput value) [All CH1~CH4 setting]
D1011	SPNO (Group SP number) [All CH1~CH4 setting]
D1012	HB (Heater current measurement) [All CH1~CH4 setting]
D1013	AL1 (Alarm-1 type) [All CH1~CH4 setting]
D1014	AL2 (Alarm-2 type) [All CH1~CH4 setting]
D1015	HY1 (Alarm-1 hysteresis) [All CH1~CH4 setting]
D1016	HY2 (Alarm-2 hysteresis) [All CH1~CH4 setting]
D1017	CT (Cycle time) [All CH1~CH4 setting]
D1018	OH (Upper limit of output) [All CH1~CH4 setting]
D1019	OL (Lower limit of output) [All CH1~CH4 setting]
D1020	RST (Restart mode) [All CH1~CH4 setting]
D1021	ORBND (ON/OFF rate detection width) [All CH1~CH4 setting]
D1022	ORHI (ON/OFF rate upper limit) [All CH1~CH4 setting]
D1023	ORLO (ON/OFF rate lower limit) [All CH1~CH4 setting]
D1024	USE (use/unuse) [All CH1~CH4 setting]
[D-SigDataEnd]

[D-SigData]-B
D0001.00    AL1 relay
D0001.04    AL2 relay
D0001.08    HB relay
D0001.12    ALM lamp
D0001.13    ERR lamp
D0002.00    AL1 [CH1]
D0002.01    AL2 [CH1]
D0002.02    HB(AL3) [CH1]
D0002.04    Burnout [CH1]
D0002.05    +Over [CH1]
D0002.06    -Over [CH1]
D0002.08    ADC error [CH1]
D0002.09    RJC error [CH1]
D0002.10    Heater Shield [CH1]
D0002.12    System data error [CH1]
D0002.13    Calibration value error [CH1]
D0002.14    Parameter erroe [CH1]
D0003.00    AL1 [CH2]
D0003.01    AL2 [CH2]
D0003.02    HB(AL3) [CH2]
D0003.04    Burnout [CH2]
D0003.05    +Over [CH2]
D0003.06    -Over [CH2]
D0003.08    ADC error [CH2]
D0003.09    RJC error [CH2]
D0003.10    Heater Shield [CH2]
D0003.12    System data error [CH2]
D0003.13    Calibration value error [CH2]
D0003.14    Parameter error [CH2]
D0004.00    AL1 [CH3]
D0004.01    AL2 [CH3]
D0004.02    HB(AL3) [CH3]
D0004.04    Burnout [CH3]
D0004.05    +Over [CH3]
D0004.06    -Over [CH3]
D0004.08    ADC error [CH3]
D0004.09    RJC error [CH3]
D0004.10    Heater Shield [CH3]
D0004.12    System data error [CH3]
D0004.13    Calibration value error [CH3]
D0004.14    Parameter error [CH3]
D0005.00    AL1 [CH4]
D0005.01    AL2 [CH4]
D0005.02    HB(AL3) [CH4]
D0005.04    Burnout [CH4]
D0005.05    +Over [CH4]
D0005.06    -Over [CH4]
D0005.08    ADC error [CH4]
D0005.09    RJC error [CH4]
D0005.10    Heater Shield [CH4]
D0005.12    System data error [CH4]
D0005.13    Calibration value error [CH4]
D0005.14    Parameter error [CH4]
D0006	    1.PV (Process value) [CH1]
D0007	    2.PV (Process value) [CH2]
D0008	    3.PV (Process value) [CH3]
D0009	    4.PV (Process value) [CH4]
D0010	    1.CSP (Current target setpoint) [CH1]
D0011	    2.CSP (Current target setpoint) [CH2]
D0012	    3.CSP (Current target setpoint) [CH3]
D0013	    4.CSP (Current target setpoint) [CH4]
D0014	    1.OUT (Output value) [CH1]
D0015	    2.OUT (Output value) [CH2]
D0016	    3.OUT (Output value) [CH3]
D0017	    4.OUT (Output value) [CH4]
D0018.00    0:AUTO 1:MAN [CH1]
D0018.04    0:RUN 1:STOP[CH1]
D0018.12    0:Auto-tuning OFF 1:Auto-tuning ON [CH1]
D0019.00    0:AUTO 1:MAN [CH2]
D0019.04    0:RUN 1:STOP[CH2]
D0019.12    0:Auto-tuning OFF 1:Auto-tuning ON [CH2]
D0020.00    0:AUTO 1:MAN [CH3]
D0020.04    0:RUN 1:STOP[CH3]
D0020.12    0:Auto-tuning OFF 1:Auto-tuning ON [CH3]
D0021.00    0:AUTO 1:MAN [CH4]
D0021.04    0:RUN 1:STOP[CH4]
D0021.12    0:Auto-tuning OFF 1:Auto-tuning ON [CH4]
D0022	    1.DEV (Deviation) [CH1]
D0023	    2.DEV (Deviation) [CH2]
D0024	    3.DEV (Deviation) [CH3]
D0025	    4.DEV (Deviation) [CH4]
D0026	    1.SPNO (Set group number) [CH1]
D0027	    2.SPNO (Set group number) [CH2]
D0028	    3.SPNO (Set group number) [CH3]
D0029	    4.SPNO (Set group number) [CH4]
D0030	    1.HC (Heater current value) [CH1]
D0031	    2.HC (Heater current value) [CH2]
D0032	    3.HC (Heater current value) [CH3]
D0033	    4.HC (Heater current value) [CH4]
D0090	    (REG SL)
D0091	    (100%)
D0092	    (75%)
D0093	    (50%)
D0094	    (25%)
D0095	    (0%)
D0110	    1.SP (Target setpoint) [1CH Operation data]
D0111	    1.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0112	    1.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0113	    1.PB (Proportional band) [1CH Operation data]
D0114	    1.TI (Integral time) [1CH Operation data]
D0115	    1.TD (Derivative time) [1CH Operation data]
D0116	    1.MR (Manual reset) [1CH Operation data]
D0117	    1.HYS (Hysteresis) [1CH Operation data]
D0118	    1.DR (Direct/reverse action switching) [1CH Operation data]
D0120	    2.SP (Target setpoint) [1CH Operation data]
D0121	    2.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0122	    2.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0123	    2.PB (Proportional band) [1CH Operation data]
D0124	    2.TI (Integral time) [1CH Operation data]
D0125	    2.TD (Derivative time) [1CH Operation data]
D0126	    2.MR (Manual reset) [1CH Operation data]
D0127	    2.HYS (Hysteresis) [1CH Operation data]
D0128	    2.DR (Direct/reverse action switching) [1CH Operation data]
D0130	    3.SP (Target setpoint) [1CH Operation data]
D0131	    3.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0132	    3.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0133	    3.PB (Proportional band) [1CH Operation data]
D0134	    3.TI (Integral time) [1CH Operation data]
D0135	    3.TD (Derivative time) [1CH Operation data]
D0136	    3.MR (Manual reset) [1CH Operation data]
D0137	    3.HYS (Hysteresis) [1CH Operation data]
D0138	    3.DR (Direct/reverse action switching) [1CH Operation data]
D0140	    4.SP (Target setpoint) [1CH Operation data]
D0141	    4.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0142	    4.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0143	    4.PB (Proportional band) [1CH Operation data]
D0144	    4.TI (Integral time) [1CH Operation data]
D0145	    4.TD (Derivative time) [1CH Operation data]
D0146	    4.MR (Manual reset) [1CH Operation data]
D0147	    4.HYS (Hysteresis) [1CH Operation data]
D0148	    4.DR (Direct/reverse action switching) [1CH Operation data]
D0150	    5.SP (Target setpoint) [1CH Operation data]
D0151	    5.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0152	    5.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0153	    5.PB (Proportional band) [1CH Operation data]
D0154	    5.TI (Integral time) [1CH Operation data]
D0155	    5.TD (Derivative time) [1CH Operation data]
D0156	    5.MR (Manual reset) [1CH Operation data]
D0157	    5.HYS (Hysteresis) [1CH Operation data]
D0158	    5.DR (Direct/reverse action switching) [1CH Operation data]
D0160	    6.SP (Target setpoint) [1CH Operation data]
D0161	    6.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0162	    6.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0163	    6.PB (Proportional band) [1CH Operation data]
D0164	    6.TI (Integral time) [1CH Operation data]
D0165	    6.TD (Derivative time) [1CH Operation data]
D0166	    6.MR (Manual reset) [1CH Operation data]
D0167	    6.HYS (Hysteresis) [1CH Operation data]
D0168	    6.DR (Direct/reverse action switching) [1CH Operation data]
D0170	    7.SP (Target setpoint) [1CH Operation data]
D0171	    7.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0172	    7.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0173	    7.PB (Proportional band) [1CH Operation data]
D0174	    7.TI (Integral time) [1CH Operation data]
D0175	    7.TD (Derivative time) [1CH Operation data]
D0176	    7.MR (Manual reset) [1CH Operation data]
D0177	    7.HYS (Hysteresis) [1CH Operation data]
D0178	    7.DR (Direct/reverse action switching) [1CH Operation data]
D0180	    8.SP (Target setpoint) [1CH Operation data]
D0181	    8.A1 (Alarm setpoints for alarm 1) [1CH Operation data]
D0182	    8.A2 (Alarm setpoints for alarm 2) [1CH Operation data]
D0183	    8.PB (Proportional band) [1CH Operation data]
D0184	    8.TI (Integral time) [1CH Operation data]
D0185	    8.TD (Derivative time) [1CH Operation data]
D0186	    8.MR (Manual reset) [1CH Operation data]
D0187	    8.HYS (Hysteresis) [1CH Operation data]
D0188	    8.DR (Direct/reverse action switching) [1CH Operation data]
D0210	    1.SP (Target setpoint) [2CH Operation data]
D0211	    1.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0212	    1.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0213	    1.PB (Proportional band) [2CH Operation data]
D0214	    1.TI (Integral time) [2CH Operation data]
D0215	    1.TD (Derivative time) [2CH Operation data]
D0216	    1.MR (Manual reset) [2CH Operation data]
D0217	    1.HYS (Hysteresis) [2CH Operation data]
D0218	    1.DR (Direct/reverse action switching) [2CH Operation data]
D0220	    2.SP (Target setpoint) [2CH Operation data]
D0221	    2.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0222	    2.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0223	    2.PB (Proportional band) [2CH Operation data]
D0224	    2.TI (Integral time) [2CH Operation data]
D0225	    2.TD (Derivative time) [2CH Operation data]
D0226	    2.MR (Manual reset) [2CH Operation data]
D0227	    2.HYS (Hysteresis) [2CH Operation data]
D0228	    2.DR (Direct/reverse action switching) [2CH Operation data]
D0230	    3.SP (Target setpoint) [2CH Operation data]
D0231	    3.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0232	    3.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0233	    3.PB (Proportional band) [2CH Operation data]
D0234	    3.TI (Integral time) [2CH Operation data]
D0235	    3.TD (Derivative time) [2CH Operation data]
D0236	    3.MR (Manual reset) [2CH Operation data]
D0237	    3.HYS (Hysteresis) [2CH Operation data]
D0238	    3.DR (Direct/reverse action switching) [2CH Operation data]
D0240	    4.SP (Target setpoint) [2CH Operation data]
D0241	    4.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0242	    4.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0243	    4.PB (Proportional band) [2CH Operation data]
D0244	    4.TI (Integral time) [2CH Operation data]
D0245	    4.TD (Derivative time) [2CH Operation data]
D0246	    4.MR (Manual reset) [2CH Operation data]
D0247	    4.HYS (Hysteresis) [2CH Operation data]
D0248	    4.DR (Direct/reverse action switching) [2CH Operation data]
D0250	    5.SP (Target setpoint) [2CH Operation data]
D0251	    5.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0252	    5.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0253	    5.PB (Proportional band) [2CH Operation data]
D0254	    5.TI (Integral time) [2CH Operation data]
D0255	    5.TD (Derivative time) [2CH Operation data]
D0256	    5.MR (Manual reset) [2CH Operation data]
D0257	    5.HYS (Hysteresis) [2CH Operation data]
D0258	    5.DR (Direct/reverse action switching) [2CH Operation data]
D0260	    6.SP (Target setpoint) [2CH Operation data]
D0261	    6.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0262	    6.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0263	    6.PB (Proportional band) [2CH Operation data]
D0264	    6.TI (Integral time) [2CH Operation data]
D0265	    6.TD (Derivative time) [2CH Operation data]
D0266	    6.MR (Manual reset) [2CH Operation data]
D0267	    6.HYS (Hysteresis) [2CH Operation data]
D0268	    6.DR (Direct/reverse action switching) [2CH Operation data]
D0270	    7.SP (Target setpoint) [2CH Operation data]
D0271	    7.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0272	    7.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0273	    7.PB (Proportional band) [2CH Operation data]
D0274	    7.TI (Integral time) [2CH Operation data]
D0275	    7.TD (Derivative time) [2CH Operation data]
D0276	    7.MR (Manual reset) [2CH Operation data]
D0277	    7.HYS (Hysteresis) [2CH Operation data]
D0278	    7.DR (Direct/reverse action switching) [2CH Operation data]
D0280	    8.SP (Target setpoint) [2CH Operation data]
D0281	    8.A1 (Alarm setpoints for alarm 1) [2CH Operation data]
D0282	    8.A2 (Alarm setpoints for alarm 2) [2CH Operation data]
D0283	    8.PB (Proportional band) [2CH Operation data]
D0284	    8.TI (Integral time) [2CH Operation data]
D0285	    8.TD (Derivative time) [2CH Operation data]
D0286	    8.MR (Manual reset) [2CH Operation data]
D0287	    8.HYS (Hysteresis) [2CH Operation data]
D0288	    8.DR (Direct/reverse action switching) [2CH Operation data]
D0310	    1.SP (Target setpoint) [3CH Operation data]
D0311	    1.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0312	    1.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0313	    1.PB (Proportional band) [3CH Operation data]
D0314	    1.TI (Integral time) [3CH Operation data]
D0315	    1.TD (Derivative time) [3CH Operation data]
D0316	    1.MR (Manual reset) [3CH Operation data]
D0317	    1.HYS (Hysteresis) [3CH Operation data]
D0318	    1.DR (Direct/reverse action switching) [3CH Operation data]
D0320	    2.SP (Target setpoint) [3CH Operation data]
D0321	    2.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0322	    2.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0323	    2.PB (Proportional band) [3CH Operation data]
D0324	    2.TI (Integral time) [3CH Operation data]
D0325	    2.TD (Derivative time) [3CH Operation data]
D0326	    2.MR (Manual reset) [3CH Operation data]
D0327	    2.HYS (Hysteresis) [3CH Operation data]
D0328	    2.DR (Direct/reverse action switching) [3CH Operation data]
D0330	    3.SP (Target setpoint) [3CH Operation data]
D0331	    3.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0332	    3.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0333	    3.PB (Proportional band) [3CH Operation data]
D0334	    3.TI (Integral time) [3CH Operation data]
D0335	    3.TD (Derivative time) [3CH Operation data]
D0336	    3.MR (Manual reset) [3CH Operation data]
D0337	    3.HYS (Hysteresis) [3CH Operation data]
D0338	    3.DR (Direct/reverse action switching) [3CH Operation data]
D0340	    4.SP (Target setpoint) [3CH Operation data]
D0341	    4.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0342	    4.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0343	    4.PB (Proportional band) [3CH Operation data]
D0344	    4.TI (Integral time) [3CH Operation data]
D0345	    4.TD (Derivative time) [3CH Operation data]
D0346	    4.MR (Manual reset) [3CH Operation data]
D0347	    4.HYS (Hysteresis) [3CH Operation data]
D0348	    4.DR (Direct/reverse action switching) [3CH Operation data]
D0350	    5.SP (Target setpoint) [3CH Operation data]
D0351	    5.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0352	    5.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0353	    5.PB (Proportional band) [3CH Operation data]
D0354	    5.TI (Integral time) [3CH Operation data]
D0355	    5.TD (Derivative time) [3CH Operation data]
D0356	    5.MR (Manual reset) [3CH Operation data]
D0357	    5.HYS (Hysteresis) [3CH Operation data]
D0358	    5.DR (Direct/reverse action switching) [3CH Operation data]
D0360	    6.SP (Target setpoint) [3CH Operation data]
D0361	    6.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0362	    6.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0363	    6.PB (Proportional band) [3CH Operation data]
D0364	    6.TI (Integral time) [3CH Operation data]
D0365	    6.TD (Derivative time) [3CH Operation data]
D0366	    6.MR (Manual reset) [3CH Operation data]
D0367	    6.HYS (Hysteresis) [3CH Operation data]
D0368	    6.DR (Direct/reverse action switching) [3CH Operation data]
D0370	    7.SP (Target setpoint) [3CH Operation data]
D0371	    7.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0372	    7.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0373	    7.PB (Proportional band) [3CH Operation data]
D0374	    7.TI (Integral time) [3CH Operation data]
D0375	    7.TD (Derivative time) [3CH Operation data]
D0376	    7.MR (Manual reset) [3CH Operation data]
D0377	    7.HYS (Hysteresis) [3CH Operation data]
D0378	    7.DR (Direct/reverse action switching) [3CH Operation data]
D0380	    8.SP (Target setpoint) [3CH Operation data]
D0381	    8.A1 (Alarm setpoints for alarm 1) [3CH Operation data]
D0382	    8.A2 (Alarm setpoints for alarm 2) [3CH Operation data]
D0383	    8.PB (Proportional band) [3CH Operation data]
D0384	    8.TI (Integral time) [3CH Operation data]
D0385	    8.TD (Derivative time) [3CH Operation data]
D0386	    8.MR (Manual reset) [3CH Operation data]
D0387	    8.HYS (Hysteresis) [3CH Operation data]
D0388	    8.DR (Direct/reverse action switching) [3CH Operation data]
D0410	    1.SP (Target setpoint) [4CH Operation data]
D0411	    1.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0412	    1.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0413	    1.PB (Proportional band) [4CH Operation data]
D0414	    1.TI (Integral time) [4CH Operation data]
D0415	    1.TD (Derivative time) [4CH Operation data]
D0416	    1.MR (Manual reset) [4CH Operation data]
D0417	    1.HYS (Hysteresis) [4CH Operation data]
D0418	    1.DR (Direct/reverse action switching) [4CH Operation data]
D0420	    2.SP (Target setpoint) [4CH Operation data]
D0421	    2.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0422	    2.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0423	    2.PB (Proportional band) [4CH Operation data]
D0424	    2.TI (Integral time) [4CH Operation data]
D0425	    2.TD (Derivative time) [4CH Operation data]
D0426	    2.MR (Manual reset) [4CH Operation data]
D0427	    2.HYS (Hysteresis) [4CH Operation data]
D0428	    2.DR (Direct/reverse action switching) [4CH Operation data]
D0430	    3.SP (Target setpoint) [4CH Operation data]
D0431	    3.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0432	    3.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0433	    3.PB (Proportional band) [4CH Operation data]
D0434	    3.TI (Integral time) [4CH Operation data]
D0435	    3.TD (Derivative time) [4CH Operation data]
D0436	    3.MR (Manual reset) [4CH Operation data]
D0437	    3.HYS (Hysteresis) [4CH Operation data]
D0438	    3.DR (Direct/reverse action switching) [4CH Operation data]
D0440	    4.SP (Target setpoint) [4CH Operation data]
D0441	    4.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0442	    4.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0443	    4.PB (Proportional band) [4CH Operation data]
D0444	    4.TI (Integral time) [4CH Operation data]
D0445	    4.TD (Derivative time) [4CH Operation data]
D0446	    4.MR (Manual reset) [4CH Operation data]
D0447	    4.HYS (Hysteresis) [4CH Operation data]
D0448	    4.DR (Direct/reverse action switching) [4CH Operation data]
D0450	    5.SP (Target setpoint) [4CH Operation data]
D0451	    5.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0452	    5.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0453	    5.PB (Proportional band) [4CH Operation data]
D0454	    5.TI (Integral time) [4CH Operation data]
D0455	    5.TD (Derivative time) [4CH Operation data]
D0456	    5.MR (Manual reset) [4CH Operation data]
D0457	    5.HYS (Hysteresis) [4CH Operation data]
D0458	    5.DR (Direct/reverse action switching) [4CH Operation data]
D0460	    6.SP (Target setpoint) [4CH Operation data]
D0461	    6.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0462	    6.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0463	    6.PB (Proportional band) [4CH Operation data]
D0464	    6.TI (Integral time) [4CH Operation data]
D0465	    6.TD (Derivative time) [4CH Operation data]
D0466	    6.MR (Manual reset) [4CH Operation data]
D0467	    6.HYS (Hysteresis) [4CH Operation data]
D0468	    6.DR (Direct/reverse action switching) [4CH Operation data]
D0470	    7.SP (Target setpoint) [4CH Operation data]
D0471	    7.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0472	    7.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0473	    7.PB (Proportional band) [4CH Operation data]
D0474	    7.TI (Integral time) [4CH Operation data]
D0475	    7.TD (Derivative time) [4CH Operation data]
D0476	    7.MR (Manual reset) [4CH Operation data]
D0477	    7.HYS (Hysteresis) [4CH Operation data]
D0478	    7.DR (Direct/reverse action switching) [4CH Operation data]
D0480	    8.SP (Target setpoint) [4CH Operation data]
D0481	    8.A1 (Alarm setpoints for alarm 1) [4CH Operation data]
D0482	    8.A2 (Alarm setpoints for alarm 2) [4CH Operation data]
D0483	    8.PB (Proportional band) [4CH Operation data]
D0484	    8.TI (Integral time) [4CH Operation data]
D0485	    8.TD (Derivative time) [4CH Operation data]
D0486	    8.MR (Manual reset) [4CH Operation data]
D0487	    8.HYS (Hysteresis) [4CH Operation data]
D0488	    8.DR (Direct/reverse action switching) [4CH Operation data]
D0510	    1.SP (Target setpoint) [All CH1~CH4 setting]
D0511	    1.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0512	    1.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0513	    1.PB (Proportional band) [All CH1~CH4 setting]
D0514	    1.TI (Integral time) [All CH1~CH4 setting]
D0515	    1.TD (Derivative time) [All CH1~CH4 setting]
D0516	    1.MR (Manual reset) [All CH1~CH4 setting]
D0517	    1.HYS (Hysteresis) [All CH1~CH4 setting]
D0518	    1.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0520	    2.SP (Target setpoint) [All CH1~CH4 setting]
D0521	    2.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0522	    2.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0523	    2.PB (Proportional band) [All CH1~CH4 setting]
D0524	    2.TI (Integral time) [All CH1~CH4 setting]
D0525	    2.TD (Derivative time) [All CH1~CH4 setting]
D0526	    2.MR (Manual reset) [All CH1~CH4 setting]
D0527	    2.HYS (Hysteresis) [All CH1~CH4 setting]
D0528	    2.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0530	    3.SP (Target setpoint) [All CH1~CH4 setting]
D0531	    3.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0532	    3.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0533	    3.PB (Proportional band) [All CH1~CH4 setting]
D0534	    3.TI (Integral time) [All CH1~CH4 setting]
D0535	    3.TD (Derivative time) [All CH1~CH4 setting]
D0536	    3.MR (Manual reset) [All CH1~CH4 setting]
D0537	    3.HYS (Hysteresis) [All CH1~CH4 setting]
D0538	    3.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0540	    4.SP (Target setpoint) [All CH1~CH4 setting]
D0541	    4.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0542	    4.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0543	    4.PB (Proportional band) [All CH1~CH4 setting]
D0544	    4.TI (Integral time) [All CH1~CH4 setting]
D0545	    4.TD (Derivative time) [All CH1~CH4 setting]
D0546	    4.MR (Manual reset) [All CH1~CH4 setting]
D0547	    4.HYS (Hysteresis) [All CH1~CH4 setting]
D0548	    4.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0550	    5.SP (Target setpoint) [All CH1~CH4 setting]
D0551	    5.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0552	    5.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0553	    5.PB (Proportional band) [All CH1~CH4 setting]
D0554	    5.TI (Integral time) [All CH1~CH4 setting]
D0555	    5.TD (Derivative time) [All CH1~CH4 setting]
D0556	    5.MR (Manual reset) [All CH1~CH4 setting]
D0557	    5.HYS (Hysteresis) [All CH1~CH4 setting]
D0558	    5.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0560	    6.SP (Target setpoint) [All CH1~CH4 setting]
D0561	    6.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0562	    6.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0563	    6.PB (Proportional band) [All CH1~CH4 setting]
D0564	    6.TI (Integral time) [All CH1~CH4 setting]
D0565	    6.TD (Derivative time) [All CH1~CH4 setting]
D0566	    6.MR (Manual reset) [All CH1~CH4 setting]
D0567	    6.HYS (Hysteresis) [All CH1~CH4 setting]
D0568	    6.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0570	    7.SP (Target setpoint) [All CH1~CH4 setting]
D0571	    7.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0572	    7.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0573	    7.PB (Proportional band) [All CH1~CH4 setting]
D0574	    7.TI (Integral time) [All CH1~CH4 setting]
D0575	    7.TD (Derivative time) [All CH1~CH4 setting]
D0576	    7.MR (Manual reset) [All CH1~CH4 setting]
D0577	    7.HYS (Hysteresis) [All CH1~CH4 setting]
D0578	    7.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0580	    8.SP (Target setpoint) [All CH1~CH4 setting]
D0581	    8.A1 (Alarm setpoints for alarm 1) [All CH1~CH4 setting]
D0582	    8.A2 (Alarm setpoints for alarm 2) [All CH1~CH4 setting]
D0583	    8.PB (Proportional band) [All CH1~CH4 setting]
D0584	    8.TI (Integral time) [All CH1~CH4 setting]
D0585	    8.TD (Derivative time) [All CH1~CH4 setting]
D0586	    8.MR (Manual reset) [All CH1~CH4 setting]
D0587	    8.HYS (Hysteresis) [All CH1~CH4 setting]
D0588	    8.DR (Direct/reverse action switching) [All CH1~CH4 setting]
D0600	    SC (SUPER function selection) [1CH Setup data]
D0601	    AT (Auto-tuning selection) [1CH Setup data]
D0602	    SP.UP (Setpoint ramp-up rate setting) [1CH Setup data]
D0603	    SP.DN (Setpoint ramp-down rate setting) [1CH Setup data]
D0604	    SP.R (Ramp-rate time unit setting) [1CH Setup data]
D0605	    FL (Filter) [1CH Setup data]
D0606	    BS (Input compensation bias) [1CH Setup data]
D0607	    A/M (AUTO/MAN modes) [1CH Setup data]
D0608	    R/S (STOP/RUN modes) [1CH Setup data]
D0609	    MANOUT (Manual output value) [1CH Setup data]
D0610	    PROUT (Preset output value) [1CH Setup data]
D0611	    SPNO (Group SP number) [1CH Setup data]
D0612	    HB (Heater current measurement) [1CH Setup data]
D0613	    AL1 (Alarm-1 type) [1CH Setup data]
D0614	    AL2 (Alarm-2 type) [1CH Setup data]
D0615	    HY1 (Alarm-1 hysteresis) [1CH Setup data]
D0616	    HY2 (Alarm-2 hysteresis) [1CH Setup data]
D0617	    CT (Cycle time) [1CH Setup data]
D0618	    OH (Upper limit of output) [1CH Setup data]
D0619	    OL (Lower limit of output) [1CH Setup data]
D0620	    RST (Restart mode) [1CH Setup data]
D0621	    ORBND (ON/OFF rate detection width) [1CH Setup data]
D0622	    ORHI (ON/OFF rate upper limit) [1CH Setup data]
D0623	    ORLO (ON/OFF rate lower limit) [1CH Setup data]
D0624	    USE (use/unuse) [1CH Setup data]
D0625	    A3 (Alarm-3 setpoint) [1CH Setup data]
D0626	    AL3 (Alarm-3 type) [1CH Setup data]
D0627	    HY3 (Alarm-3 hysteresis) [1CH Setup data]
D0650	    PD (Decimal point position) [1CH Setup data]
D0651	    RH (Instrument range upper limit) [1CH Setup data]
D0652	    RL (Instrument range lower limit) [1CH Setup data]
D0653	    ARSL (ARM action mode) [1CH Setup data]
D0654	    MD (Channel action mode) [1CH Setup data]
D0700	    SC (SUPER function selection) [2CH Setup data]
D0701	    AT (Auto-tuning selection) [2CH Setup data]
D0702	    SP.UP (Setpoint ramp-up rate setting) [2CH Setup data]
D0703	    SP.DN (Setpoint ramp-down rate setting) [2CH Setup data]
D0704	    SP.R (Rate time unit) [2CH Setup data]
D0705	    FL (Filter) [2CH Setup data]
D0706	    BS (Input compensation bias) [2CH Setup data]
D0707	    A/M (AUTO/MAN modes) [2CH Setup data]
D0708	    R/S (STOP/RUN modes) [2CH Setup data]
D0709	    MANOUT (ManualOutput value) [2CH Setup data]
D0710	    PROUT (PresetOutput value) [2CH Setup data]
D0711	    SPNO (Group SP number) [2CH Setup data]
D0712	    HB (Heater current measurement) [2CH Setup data]
D0713	    AL1 (Alarm-1 type) [2CH Setup data]
D0714	    AL2 (Alarm-2 type) [2CH Setup data]
D0715	    HY1 (Alarm-1 hysteresis) [2CH Setup data]
D0716	    HY2 (Alarm-2 hysteresis) [2CH Setup data]
D0717	    CT (Cycle time) [2CH Setup data]
D0718	    OH (Upper limit of output) [2CH Setup data]
D0719	    OL (Lower limit of output) [2CH Setup data]
D0720	    RST (Restart mode) [2CH Setup data]
D0721	    ORBND (ON/OFF rate detection width) [2CH Setup data]
D0722	    ORHI (ON/OFF rate upper limit) [2CH Setup data]
D0723	    ORLO (ON/OFF rate lower limit) [2CH Setup data]
D0724	    USE (use/unuse) [2CH Setup data]
D0725	    A3 (Alarm-3 setpoint) [2CH Setup data]
D0726	    AL3 (Alarm-3 type) [2CH Setup data]
D0727	    HY3 (Alarm-3 hysteresis) [2CH Setup data]
D0750	    PD (Decimal point position) [2CH Setup data]
D0751	    RH (Instrument range upper limit) [2CH Setup data]
D0752	    RL (Instrument range lower limit) [2CH Setup data]
D0753	    ARSL (ARM action mode) [2CH Setup data]
D0754	    MD (Channel action mode) [2CH Setup data]
D0800	    SC (SUPER function selection) [3CH Setup data]
D0801	    AT (Auto-tuning selection) [3CH Setup data]
D0802	    SP.UP (Setpoint ramp-up rate setting) [3CH Setup data]
D0803	    SP.DN (Setpoint ramp-down rate setting) [3CH Setup data]
D0804	    SP.R (Rate time unit) [3CH Setup data]
D0805	    FL (Filter) [3CH Setup data]
D0806	    BS (Input compensation bias) [3CH Setup data]
D0807	    A/M (AUTO/MAN modes) [3CH Setup data]
D0808	    R/S (STOP/RUN modes) [3CH Setup data]
D0809	    MANOUT (ManualOutput value) [3CH Setup data]
D0810	    PROUT (PresetOutput value) [3CH Setup data]
D0811	    SPNO (Group SP number) [3CH Setup data]
D0812	    HB (Heater current measurement) [3CH Setup data]
D0813	    AL1 (Alarm-1 type) [3CH Setup data]
D0814	    AL2 (Alarm-2 type) [3CH Setup data]
D0815	    HY1 (Alarm-1 hysteresis) [3CH Setup data]
D0816	    HY2 (Alarm-2 hysteresis) [3CH Setup data]
D0817	    CT (Cycle time) [3CH Setup data]
D0818	    OH (Upper limit of output) [3CH Setup data]
D0819	    OL (Lower limit of output) [3CH Setup data]
D0820	    RST (Restart mode) [3CH Setup data]
D0821	    ORBND (ON/OFF rate detection width) [3CH Setup data]
D0822	    ORHI (ON/OFF rate upper limit) [3CH Setup data]
D0823	    ORLO (ON/OFF rate lower limit) [3CH Setup data]
D0824	    USE (use/unuse) [3CH Setup data]
D0825	    A3 (Alarm-3 setpoint) [3CH Setup data]
D0826	    AL3 (Alarm-3 type) [3CH Setup data]
D0827	    HY3 (Alarm-3 hysteresis) [3CH Setup data]
D0850	    PD (Decimal point position) [3CH Setup data]
D0851	    RH (Instrument range upper limit) [3CH Setup data]
D0852	    RL (Instrument range lower limit) [3CH Setup data]
D0853	    ARSL (ARM action mode) [3CH Setup data]
D0854	    MD (Channel action mode) [3CH Setup data]
D0900	    SC (SUPER function selection) [4CH Setup data]
D0901	    AT (Auto-tuning selection) [4CH Setup data]
D0902	    SP.UP (Setpoint ramp-up rate setting) [4CH Setup data]
D0903	    SP.DN (Setpoint ramp-down rate setting) [4CH Setup data]
D0904	    SP.R (Rate time unit) [4CH Setup data]
D0905	    FL (Filter) [4CH Setup data]
D0906	    BS (Input compensation bias) [4CH Setup data]
D0907	    A/M (AUTO/MAN modes) [4CH Setup data]
D0908	    R/S (STOP/RUN modes) [4CH Setup data]
D0909	    MANOUT (Manual output value) [4CH Setup data]
D0910	    PROUT (Preset output value) [4CH Setup data]
D0911	    SPNO (Group SP number) [4CH Setup data]
D0912	    HB (Heater current measurement) [4CH Setup data]
D0913	    AL1 (Alarm-1 type) [4CH Setup data]
D0914	    AL2 (Alarm-2 type) [4CH Setup data]
D0915	    HY1 (Alarm-1 hysteresis) [4CH Setup data]
D0916	    HY2 (Alarm-2 hysteresis) [4CH Setup data]
D0917	    CT (Cycle time) [4CH Setup data]
D0918	    OH (Upper limit of output) [4CH Setup data]
D0919	    OL (Lower limit of output) [4CH Setup data]
D0920	    RST (Restart mode) [4CH Setup data]
D0921	    ORBND (ON/OFF rate detection width) [4CH Setup data]
D0922	    ORHI (ON/OFF rate upper limit) [4CH Setup data]
D0923	    ORLO (ON/OFF rate lower limit) [4CH Setup data]
D0924	    USE (use/unuse) [4CH Setup data]
D0925	    A3 (Alarm-3 setpoint) [4CH Setup data]
D0926	    AL3 (Alarm-3 type) [4CH Setup data]
D0927	    HY3 (Alarm-3 hysteresis) [4CH Setup data]
D0950	    PD (Decimal point position) [4CH Setup data]
D0951	    RH (Instrument range upper limit) [4CH Setup data]
D0952	    RL (Instrument range lower limit) [4CH Setup data]
D0953	    ARSL (ARM action mode) [4CH Setup data]
D0954	    MD (Channel action mode) [4CH Setup data]
D0955	    STEUP (Setup mode) [All CH Setup data]
D0956	    IN (Input type) [All CH Setup data]
D1000	    SC (SUPER function selection) [All CH1~CH4 setting]
D1001	    AT (Auto-tuning selection) [All CH1~CH4 setting]
D1002	    SP.UP (Setpoint ramp-up rate setting) [All CH1~CH4 setting]
D1003	    SP.DN (Setpoint ramp-down rate setting) [All CH1~CH4 setting]
D1004	    SP.R (Rate time unit) [All CH1~CH4 setting]
D1005	    FL (Filter) [All CH1~CH4 setting]
D1006	    BS (Input compensation bias) [All CH1~CH4 setting]
D1007	    A/M (AUTO/MAN modes) [All CH1~CH4 setting]
D1008	    R/S (STOP/RUN modes) [All CH1~CH4 setting]
D1009	    MANOUT (ManualOutput value) [All CH1~CH4 setting]
D1010	    PROUT (PresetOutput value) [All CH1~CH4 setting]
D1011	    SPNO (Group SP number) [All CH1~CH4 setting]
D1012	    HB (Heater current measurement) [All CH1~CH4 setting]
D1013	    AL1 (Alarm-1 type) [All CH1~CH4 setting]
D1014	    AL2 (Alarm-2 type) [All CH1~CH4 setting]
D1015	    HY1 (Alarm-1 hysteresis) [All CH1~CH4 setting]
D1016	    HY2 (Alarm-2 hysteresis) [All CH1~CH4 setting]
D1017	    CT (Cycle time) [All CH1~CH4 setting]
D1018	    OH (Upper limit of output) [All CH1~CH4 setting]
D1019	    OL (Lower limit of output) [All CH1~CH4 setting]
D1020	    RST (Restart mode) [All CH1~CH4 setting]
D1021	    ORBND (ON/OFF rate detection width) [All CH1~CH4 setting]
D1022	    ORHI (ON/OFF rate upper limit) [All CH1~CH4 setting]
D1023	    ORLO (ON/OFF rate lower limit) [All CH1~CH4 setting]
D1024	    USE (use/unuse) [All CH1~CH4 setting]
[D-SigDataEnd]-B

[I-SigData]
[I-SigDataEnd]

[I-SigData]-B
I0001	+1
I0002	+10
I0003	+100
I0004	+1000
I0005	-1
I0006	-10
I0007	-100
I0008	-1000
I0101	AL1 [1CH Status]
I0105	AL2 [1CH Status]
I0109	H.B [1CH Status]
I0117	BOUT [1CH Status]
I0121	+OVER [1CH Status]
I0125	-OVER [1CH Status]
I0133	ADCERR [1CH Status]
I0137	RJCERR [1CH Status]
I0141	H Shield [1CH Status]
I0149	SYSERR [1CH Status]
I0153	CALERR [1CH Status]
I0157	PARAERR [1CH Status]
I0201	AL1 [2CH Status]
I0205	AL2 [2CH Status]
I0209	H.B [2CH Status]
I0217	BOUT [2CH Status]
I0221	+OVER [2CH Status]
I0225	-OVER [2CH Status]
I0233	ADCERR [2CH Status]
I0237	RJCERR [2CH Status]
I0241	H Shield [2CH Status]
I0249	SYSERR [2CH Status]
I0253	CALERR [2CH Status]
I0257	PARAERR [2CH Status]
I0301	AL1 [3CH Status]
I0305	AL2 [3CH Status]
I0309	H.B [3CH Status]
I0317	BOUT [3CH Status]
I0321	+OVER [3CH Status]
I0325	-OVER [3CH Status]
I0333	ADCERR [3CH Status]
I0337	RJCERR [3CH Status]
I0341	H Shield [3CH Status]
I0349	SYSERR [3CH Status]
I0353	CALERR [3CH Status]
I0357	PARAERR [3CH Status]
I0401	AL1 [4CH Status]
I0405	AL2 [4CH Status]
I0409	H.B [4CH Status]
I0417	BOUT [4CH Status]
I0421	+OVER [4CH Status]
I0425	-OVER [4CH Status]
I0433	ADCERR [4CH Status]
I0437	RJCERR [4CH Status]
I0441	H Shield [4CH Status]
I0449	SYSERR [4CH Status]
I0453	CALERR [4CH Status]
I0457	PARAERR [4CH Status]
I0501	A/M [1CH Mode]
I0505	R/S [1CH Mode]
I0513	AT [1CH Mode]
I0601	A/M [2CH Mode]
I0605	R/S [2CH Mode]
I0613	AT [2CH Mode]
I0701	A/M [3CH Mode]
I0705	R/S [3CH Mode]
I0713	AT [3CH Mode]
I0801	A/M [4CH Mode]
I0805	R/S [4CH Mode]
I0813	AT [4CH Mode]
I0899	TIMING [4CH Mode]
[I-SigDataEnd]-B