Name=PLC1 PBC MaxSigCnt=134 DataFormat=Decimal [SigData] 01000 Channel 1 actual position 01001 Channel 2 actual position 01002 Channel 1 uncorrected moving average 01003 Channel 2 uncorrected moving average 01004 Channel 1 corrected moving average 01005 Channel 2 corrected moving average 01006 Calculated value 01007 Calculated value 01008 Channel 1 measured value 01009 Channel 2 measured value 01010 Channel 1 calculated output value 01011 Channel 2 calculated output value 01012 Analog output voltage for channel 1 01013 Analog output voltage for channel 2 01014 Beam intensity distribution 8-part division for channel 1 01014.0 Actual beam intensity data area 1 (cell 100) with 1 pixel capacity (TOP) 01014.1 Actual beam intensity data area 2 (cells 84-99) with 16 pixel capacity 01014.2 Actual beam intensity data area 3 (cells 68-83) with 16 pixel capacity 01014.3 Actual beam intensity data area 4 (cells 52-67) with 16 pixel capacity 01014.4 Actual beam intensity data area 5 (cells 36-51) with 16 pixel capacity 01014.5 Actual beam intensity data area 6 (cells 20-35) with 16 pixel capacity 01014.6 Actual beam intensity data area 7 (cells 4-19) with 16 pixel capacity 01014.7 Actual beam intensity data area 8 (cell 3) with 1 pixel capacity (BOTTOM) 01014.8 Normalized beam intensity data area 1 (cell 100) with 1 pixel capacity (TOP) 01014.9 Normalized beam intensity data area 2 (cells 84-99) with 16 pixel capacity 01014.A Normalized beam intensity data area 3 (cells 68-83) with 16 pixel capacity 01014.B Normalized beam intensity data area 4 (cells 52-67) with 16 pixel capacity 01014.C Normalized beam intensity data area 5 (cells 36-51) with 16 pixel capacity 01014.D Normalized beam intensity data area 6 (cells 20-35) with 16 pixel capacity 01014.E Normalized beam intensity data area 7 (cells 4-19) with 16 pixel capacity 01014.F Actual beam intensity data area 8 (cell 3) with 1 pixel capacity (BOTTOM) 01015 Beam intensity distribution 8-part division for channel 2 01015.0 Actual beam intensity data area 1 (cell 100) with 1 pixel capacity (TOP) 01015.1 Actual beam intensity data area 2 (cells 84-99) with 16 pixel capacity 01015.2 Actual beam intensity data area 3 (cells 68-83) with 16 pixel capacity 01015.3 Actual beam intensity data area 4 (cells 52-67) with 16 pixel capacity 01015.4 Actual beam intensity data area 5 (cells 36-51) with 16 pixel capacity 01015.5 Actual beam intensity data area 6 (cells 20-35) with 16 pixel capacity 01015.6 Actual beam intensity data area 7 (cells 4-19) with 16 pixel capacity 01015.7 Actual beam intensity data area 8 (cell 3) with 1 pixel capacity (BOTTOM) 01015.8 Normalized beam intensity data area 1 (cell 100) with 1 pixel capacity (TOP) 01015.9 Normalized beam intensity data area 2 (cells 84-99) with 16 pixel capacity 01015.A Normalized beam intensity data area 3 (cells 68-83) with 16 pixel capacity 01015.B Normalized beam intensity data area 4 (cells 52-67) with 16 pixel capacity 01015.C Normalized beam intensity data area 5 (cells 36-51) with 16 pixel capacity 01015.D Normalized beam intensity data area 6 (cells 20-35) with 16 pixel capacity 01015.E Normalized beam intensity data area 7 (cells 4-19) with 16 pixel capacity 01015.F Actual beam intensity data area 8 (cell 3) with 1 pixel capacity (BOTTOM) 01016 Laser output (bit 0: channel 1, bit 1: channel 2) 01016.0 Laser output for channel 1 (0: OFF, 1: ON) 01016.1 Laser output for channel 2 (0: OFF, 1: ON) 01017 Constant output (bit 0: channel 1, bit 1: channel 2) 01017.0 Constant output for channel 1 (0: OFF, 1: ON) 01017.1 Constant output for channel 2 (0: OFF, 1: ON) 01018 Smudge output (bit 0: channel 1, bit 1: channel 2) 01018.0 Smudge output for channel 1 (0: OFF, 1: ON) 01018.1 Smudge output for channel 2 (0: OFF, 1: ON) 01019 HIGH output (bits 0 to 3: channels 1 and 2, and calculations 1 and 2 respectively) 01019.0 HIGH output for measured channel 1 data (0: OFF, 1: ON) 01019.1 HIGH output for measured channel 2 data (0: OFF, 1: ON) 01019.2 HIGH output for calculated channel 1 data (0: OFF, 1: ON) 01019.3 HIGH output for calculated channel 2 data (0: OFF, 1: ON) 01020 PASS output (bits 0 to 3: channels 1 and 2, and calculations 1 and 2 respectively) 01020.0 PASS output for measured channel 1 data (0: OFF, 1: ON) 01020.1 PASS output for measured channel 2 data (0: OFF, 1: ON) 01020.2 PASS output for calculated channel 1 data (0: OFF, 1: ON) 01020.3 PASS output for calculated channel 2 data (0: OFF, 1: ON) 01021 Low output (bits 0 to 3: channels 1 and 2, and calculations 1 and 2 respectively) 01021.0 Low output for measured channel 1 data (0: OFF, 1: ON) 01021.1 Low output for measured channel 2 data (0: OFF, 1: ON) 01021.2 Low output for calculated channel 1 data (0: OFF, 1: ON) 01021.3 Low output for calculated channel 2 data (0: OFF, 1: ON) 01022 Setting by key switch (MSB 0: enabled, 1: disabled) 01023 Alarm for channel 1 01023.0 Smudge detected (1) 01023.1 Insufficient gain (1) 01023.4 Normalization error (1) 01023.5 Skip-over occurrence (1) 01023.6 Sensor head disconnection (1) 01023.7 No connection (1) 01024 Alarm for channel 2 01024.0 Smudge detected (1) 01024.1 Insufficient gain (1) 01024.4 Normalization error (1) 01024.5 Skip-over occurrence (1) 01024.6 Sensor head disconnection (1) 01024.7 No connection (1) 01025 Representative error 01025.0 CPU error (1) 01025.1 ROM error (1) 01025.2 Watchdog timer error (1) 01025.3 EEPROM checksum error (1) 01025.4 Insufficient beam intensity (1) 01025.5 Sensor head line break (1) 01025.6 Setting error (1) 01025.7 Alarm (communications error or calculation time overrun) (1) 01026 Operating mode 02000 Change to RUN mode. Data = -1 02001 Change to adjustment mode. Data = -1 02002 Center adjustment for specified channel. Data = -1, 1, 2(channel No.) 02003 Laser beam alignment and intensity adjustment for specified channel. Data = -1, 1, 2 (channel No.) 02004 Saving to EEPROM: data range = -1, 0, 1 02005 Laser ON (data = -1) 02006 Laser OFF (data = -1) 03000 Manual center adjustment for channel 1 (data range = -9999 to +9999 microns) 03001 Manual center adjustment for channel 2 (data range = -9999 to +9999 microns) 03002 Averaging frequency for Channel 1 (data range = 0 to 126 times) 03003 Averaging frequency for Channel 2 (data range = 0 to 126 times) 03004 Amount of edge position change for Channel 1 (data range = 0 to 7000 microns) 03005 Amount of edge position change for Channel 2 (data range = 0 to 7000 microns) 03006 Edge position change time for channel 1: data range = 005 to 635 (displayed and set in increments of 0.1 ms and 0.5 ms respectively) 03007 Edge position change time for channel 2: data range = 005 to 635 (displayed and set in increments of 0.1 ms and 0.5 ms respectively) 03008 HIGH threshold for channel 1 (data range = -9999 to +9999 microns) 03009 HIGH threshold for channel 2 (data range = -9999 to +9999 microns) 03010 LOW threshold for channel 1 (data range = -9999 to +9999 microns) 03011 LOW threshold for channel 2 (data range = -9999 to +9999 microns) 03012 Hysteresis width for channel 1 (data range = 0 to 9999 microns) 03013 Hysteresis width for channel 2 (data range = 0 to 9999 microns) 03014 Input type and edge position change settings for channel 1 (data range = 000 to 333) 03015 Input type and edge position change settings for channel 2 (data = 000 to 333) 03016 Edge type for channel 1 (data range = 0XX to 7XX; XX = the threshold) 03017 Edge type for channel 2 (data range = 0XX to 7XX; XX = the threshold) 03018 Analog output for channel 1 (data range = 00 to 117) 03019 Analog output for channel 2 (data range = 00 to 117) 03020 Smudge detection threshold for channel 1 (data range = 0 to 999, in increments of 0.1 %) 03021 Smudge detection threshold for channel 2 (data range = 0 to 999, in increments of 0.1 %) 03022 Assignment for event output 1 (data range = XX00 to XX15; XX = ON/OFF delay) 03023 Assignment for event output 2 (data range = XX00 to XX15: XX = ON/OFF delay) 03024 Assignment for event output 3 (data range = XX00 to XX15; XX = ON/OFF delay) 03025 Assignment for event output 4 (data range = XX00 to XX15; XX = ON/OFF delay) 03026 Constant A for 2-channel calculation (data range = -9999 to +9999) 03027 Constant B for 2-channel calculation (data range = -9999 to +9999) 03028 Constant C for 2-channel calculation (data range = -9999 to +9999) 03029 Constant D for 2-channel calculation (data range = -9999 to +9999) [SigDataEnd]